Improved Exhaust Risers Are Available for 3208 Naturally Aspirated Marine Engines {1380}
- Engine:
- 3208 (S/N: 75V1-UP; 01Z1-UP)
The improved 8L-3453 Riser and 8L-3454 Riser are now manufactured with larger NPTF ports on the bottom inboard sides. These new risers are adaptable back to first production on the serial numbers listed above.
Note: When installing the new risers, a 011-7219 Pipe Bushing must be used on each riser to connect to the existing crossover fittings.
Caterpillar Information System:
455-1186 Major Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1186 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
XQC1200 and XQC1600 Power Modules Crankshaft Main Bearings - Remove and Install
G3306B Petroleum Generator Set Engines Electronic Control System Components
XQC1200 and XQC1600 Power Modules Pistons and Connecting Rods - Install
455-7245 Major Overhaul Foundational Kit for C18 Marine Engines{1000} 455-7245 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
XQC1200 and XQC1600 Power Modules Pistons and Connecting Rods - Remove
C280 Marine Engines Coolant Pressure Is Low
C280 Marine Engines DEF Tank Sensor - Test
C8.7 Marine Engine Starting Aid (Air Inlet Heater) - Inspect/Clean/Replace
C175-20 Locomotive Engine Solenoid Valve - Test - Aftertreatment
C8.7 Marine Engine Cold Weather Starting
C8.7 Marine Engine Aftercooler Condensate Drain Valve - Inspect/Clean
2015/02/20 New Front and Rear Crankshaft Seals Are Now Used on Certain 3500 and G3500 Engines {1160, 1161}
455-1187 Major Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1187 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
Well Service Pumps Pump (Fluid End) Suction Manifold Seals - Replace
558 Forest Machine Fuel System Secondary Filter - Replace
Well Service Pumps Pump (Fluid End) Discharge Flanges and Seals - Inspect
Well Service Pumps Pump (Fluid End) Suction Pulsation Dampener - Check
455-1185 Major Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1185 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
C8.7 Marine Engine Engine Mounts - Inspect
Well Service Pumps Pump (Fluid End) Mounting Bolts - Check
Well Service Pumps Pump (Power End) Breather - Clean
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Pilot Lines
Installing the ECM Software on Certain C3.4B Engines{1901, 1920} Installing the ECM Software on Certain C3.4B Engines{1901, 1920}