C13, C15, and C18 Tier 4 Final Engines Caterpillar


Turbocharger

Usage:

826K 232


图 1g03677768

表 1
399-8603 涡轮增压器总成的技术规格 
项目  数量  零件  技术规格说明 
375-2467 法兰锁紧螺母  组装前,向螺纹上涂覆 Loctite C5A 铜防咬合剂。 
拧紧至扭矩为 70 ± 5 N·m (52 ± 4 lb ft)


图 2g03677856

表 2
项目  数量  零件  技术规格说明 
将压缩机卡箍组件拧紧至扭矩为 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)。 
按照以下步骤拧紧涡轮卡箍组件:
1. 拧紧至扭矩为 18.1 N·m (160.2 lb in)
2. 松开 1 到 2 圈。
3. 再次拧紧至扭矩为 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)。 

Caterpillar Information System:

C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System) - Differential Pressure Sensor
C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
C13, C15, and C18 Generator Set Engines Turbocharger
C4.4 Industrial Engine Model View Illustrations
2014/06/24 Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
CX31 On-Highway Transmission Transmission Oil Pan - Standard
2014/06/06 Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
CX31 On-Highway Transmission Output Transfer Yoke
CX31 On-Highway Transmission Output Transfer Yoke
Instructions for Using the 438-3338 Torque Tool Gp on Connecting Rod Bolts for All 3600, G3600, and C280 Engines{1218, 7553} Instructions for Using the 438-3338 Torque Tool Gp on Connecting Rod Bolts for All 3600, G3600, and C280 Engines{1218, 7553}
CX31 On-Highway Transmission Transmission Planetary
3512C Engine Fuel Control Actuator - Remove and Install - Dynamic Gas Blending
3512C Engine Gas Shutoff Valve - Remove and Install - Dynamic Gas Blending
390F Excavator Sound Information and Vibration Information
C4.4 Engines for Caterpillar Built Machines Fuel Injection Pump Gear - Install
2014/08/01 New Alternator Bracket for Certain C4.4 Engines {1405, 1405}
C4.4 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove
C4.4 Engines for Caterpillar Built Machines Electronic Unit Injector - Install
2014/05/30 Fuel Injection Pump on Certain C3.4 Engines {1251, 1290, 5479}
C4.4 Engines for Caterpillar Built Machines Turbocharger - Remove - Side Mounted Turbocharger
C175-16 Petroleum Generator Set Engines Maintenance Interval Schedule - MCR and Prime
C175-16 Petroleum Generator Set Engines Maintenance Interval Schedule - 25 Degree Tilt Option Emergency Generator Set Engine and Essential Power Units
2014/05/23 An Improved Tube Assembly Is Used on the Engine Oil Pumps of Certain C13 Commercial Engines {1304, 1315}
2015/03/25 A New Air Compressor Group Is Available for Certain Tier 4 Interim 3516C and C175 Generator Set Engines {1803}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.