Fuel Control Actuator - Remove and Install - Dynamic Gas Blending
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1), bolts (2), bracket (3), and slide flange (5) away from fuel control actuator (4).
- Disconnect harness assembly (6).
Show/hide table
Illustration 2 g03677428 - Remove bolts (7) and fuel control actuator (4).
Show/hide table
| |
| Illustration 1 | g03677291 |
- Install fuel control actuator (4) in the reverse order of removal.
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor
C9 Generator Set Cold Weather Starting
Commissioning Instructions for the 419-4231 Oil Mist Detector Group and the 434-6525 Oil Mist Detector Group Used on Certain C175 Engines{1336} Commissioning Instructions for the 419-4231 Oil Mist Detector Group and the 434-6525 Oil Mist Detector Group Used on Certain C175 Engines{1336}
C4.4 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
C4.4 Engines for Caterpillar Built Machines Turbocharger - Inspect - Single Turbocharger
C4.4 Engines for Caterpillar Built Machines Turbocharger - Inspect - Series Turbochargers
C4.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Series Turbochargers
C4.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Single Turbocharger
C4.4 Engines for Caterpillar Built Machines Introduction
C4.4 Engines for Caterpillar Built Machines Basic Engine
XQ125 Generator Set Diesel Exhaust Fluid Filter - Replace
DE Series Generator Sets With Cat C3.3 Engine Product Installation
CX31 On-Highway Transmission Transmission Planetary
Instructions for Using the 438-3338 Torque Tool Gp on Connecting Rod Bolts for All 3600, G3600, and C280 Engines{1218, 7553} Instructions for Using the 438-3338 Torque Tool Gp on Connecting Rod Bolts for All 3600, G3600, and C280 Engines{1218, 7553}
CX31 On-Highway Transmission Output Transfer Yoke
CX31 On-Highway Transmission Output Transfer Yoke
2014/06/06 Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
CX31 On-Highway Transmission Transmission Oil Pan - Standard
2014/06/24 Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
C4.4 Industrial Engine Model View Illustrations
C13, C15, and C18 Generator Set Engines Turbocharger
C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System) - Differential Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Turbocharger