Commissioning Instructions for the 419-4231 Oil Mist Detector Group and the 434-6525 Oil Mist Detector Group Used on Certain C175 Engines{1336}
- 发动机:
- C175-16 (序列号: M6A1-UP; M6B1-UP; P5P1-UP)
导言
阅读并理解整本说明书前，不要执行此专门说明书中列出的任何步骤。
所需零件
Show/hide table
| 434-7054 油雾探测器工具套件 (调试套件) | |
|---|---|
| 数量 | 零件 |
| 2 | 湿布和干布 |
| 30 mL | 烟雾测试油 |
| 3 | 吸油绳 150 mm (6 in) |
| 1 | 烟雾测试仪 |
| 2 | 物料安全数据表 |
| 2 | Kidde 手册 |
| 2 | 25 mm 盲塞 |
| 2 | 金属密封管 |
| 2 | 推入式接头 |
Show/hide table
| 448-4905 油雾探测器套件 (维修套件) | |
|---|---|
| 数量 | 零件 |
| 5 | 风扇固定器 |
| 5 | 压缩弹簧 |
| 5 | 底座成型密封件 |
| 5 | 风扇接头密封件 |
| 5 | M3 螺钉 |
| 500 mL | 玻璃清洗剂 |
| 2 | 泡沫芽包 |
| 2 | 4 mm 六角键 |
| 1 | 拔取工具 |
| 2 | 物料安全数据表 |
调试
请参阅下述 OEM 网站上的 OEM "安装、操作和保养手册"，了解有关 419-4231 油雾探测器总成 和 434-6525 油雾探测器总成 调试说明的更多信息：
http://www.kfp.co.uk/OilMistDetection/Pages/OMDMK7.aspx注: C175 发动机装运时在油雾探测器中安装有螺塞。 需要使用 434-7054 油雾探测器工具套件 中的接头更换螺塞，以便连接烟雾测试灯泡。
Show/hide table
 | |
| 图 1 | g03677526 |
烟雾测试仪的典型视图 (1) 移液器灯泡 (2) 管接头 (3) 尼龙管 (4) 推入式接头 (5) 吸油绳 (6) 吸油绳固定件 | |
- 将管塞 (9) 从油雾探测器 (7) 上拆下。
Show/hide table
 | |
| 图 2 | g03677490 |
C175 发动机的典型右侧 (7) 419-4232 油雾探测器 (8) 419-4234 盒 (油雾探测器控制单元) | |
Show/hide table
 | |
| 图 3 | g03677929 |
(7) 419-4232 油雾探测器 (8) 419-4234 盒 (油雾探测器控制单元) | |
Show/hide table
 | |
| 图 4 | g03677496 |
(7) 419-4232 油雾探测器 (9) 9F-2247 管塞 | |
注: 可能需要拆下个别油雾探测器，以连接烟雾测试灯泡。
- 将推入式接头 (4) 安装到油雾探测器 (7) 中。
Show/hide table
 | |
| 图 5 | g03677527 |
(2) 管接头 (3) 尼龙管 (4) 推入式接头 (7) 419-4232 油雾探测器 | |
- 将尼龙管 (3) 安装到推入式接头 (4) 中。
- 使用 OEM "安装、操作和保养手册"完成剩下的调试流程。
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
C4.4 Engines for Caterpillar Built Machines Turbocharger - Inspect - Single Turbocharger
C4.4 Engines for Caterpillar Built Machines Turbocharger - Inspect - Series Turbochargers
C4.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Series Turbochargers
C4.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Single Turbocharger
C4.4 Engines for Caterpillar Built Machines Introduction
C4.4 Engines for Caterpillar Built Machines Basic Engine
XQ125 Generator Set Diesel Exhaust Fluid Filter - Replace
DE Series Generator Sets With Cat C3.3 Engine Product Installation
C175 Connecting Rod Guide Usage Clarification{1218} C175 Connecting Rod Guide Usage Clarification{1218}
Fix for an Electrical Noise Problem on Certain 3306B Engines{1408, 1421} Fix for an Electrical Noise Problem on Certain 3306B Engines{1408, 1421}
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Configuration Parameters
C9 Generator Set Cold Weather Starting
C4.4 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor
3512C Engine Fuel Control Actuator - Remove and Install - Dynamic Gas Blending
CX31 On-Highway Transmission Transmission Planetary
Instructions for Using the 438-3338 Torque Tool Gp on Connecting Rod Bolts for All 3600, G3600, and C280 Engines{1218, 7553} Instructions for Using the 438-3338 Torque Tool Gp on Connecting Rod Bolts for All 3600, G3600, and C280 Engines{1218, 7553}
CX31 On-Highway Transmission Output Transfer Yoke
CX31 On-Highway Transmission Output Transfer Yoke
2014/06/06 Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
CX31 On-Highway Transmission Transmission Oil Pan - Standard
2014/06/24 Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
C4.4 Industrial Engine Model View Illustrations
C13, C15, and C18 Generator Set Engines Turbocharger