Turbocharger - Remove - Side Mounted Turbocharger
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
注: 塞住并盖好所有开口和管组件。
- 将软管组件从涡轮增压器进口和涡轮增压器出口上断开。 有关正确步骤,请参阅原始设备制造商(OEM)信息。
- 断开排气管组件。 有关正确的步骤,请参阅 OEM 信息。
- 如果涡轮增压器有排气弯管,应拆卸排气弯管。 有关正确的步骤,请参阅拆解和组装, "排气弯头 - 拆卸和安装"。
Show/hide table
图 1 g03678428 - 将软管 (16) 从执行器 (15) 上拆下。
- 遵循步骤 5.a 至步骤 5.c,将管组件 (12) 从涡轮增压器 (1) 上拆下。
- 拆下中空螺栓 (2),然后拆下密封垫圈 (3)(未显示)。
- 拆下中空螺栓 (10),然后拆下密封垫圈 (11)(未显示)。
- 拆卸管组件 (12)。
- 遵循步骤 6 至步骤 6.d,将管组件 (9) 从涡轮增压器 (1) 上拆下。
- 拆下螺栓 (8)。
- 拆下螺栓 (13)。
- 将管组件 (9) 从涡轮增压器 (1) 和缸体上拆下。
- 拆下密封垫 (7)(未显示)和密封垫 (14)(未显示)。
- 将螺母 (4) 从螺柱 (5) 上拆下。 从排气歧管上拆卸涡轮增压器 (1)。
注: 松开螺母时,确保涡轮增压器的重量得到支撑。
- 拆下密封垫 (6)(未显示)。
- 如有必要,将螺柱 (5) 从排气歧管上拆下。
Caterpillar Information System:
2014/05/30 Fuel Injection Pump on Certain C3.4 Engines {1251, 1290, 5479}
C4.4 Engines for Caterpillar Built Machines Electronic Unit Injector - Install
C4.4 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove
2014/08/01 New Alternator Bracket for Certain C4.4 Engines {1405, 1405}
C4.4 Engines for Caterpillar Built Machines Fuel Injection Pump Gear - Install
390F Excavator Sound Information and Vibration Information
3512C Engine Gas Shutoff Valve - Remove and Install - Dynamic Gas Blending
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System) - Differential Pressure Sensor
C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
C13, C15, and C18 Generator Set Engines Turbocharger
C4.4 Industrial Engine Model View Illustrations
C175-16 Petroleum Generator Set Engines Maintenance Interval Schedule - MCR and Prime
C175-16 Petroleum Generator Set Engines Maintenance Interval Schedule - 25 Degree Tilt Option Emergency Generator Set Engine and Essential Power Units
2014/05/23 An Improved Tube Assembly Is Used on the Engine Oil Pumps of Certain C13 Commercial Engines {1304, 1315}
2015/03/25 A New Air Compressor Group Is Available for Certain Tier 4 Interim 3516C and C175 Generator Set Engines {1803}
C4.4 Engines for Caterpillar Built Machines Turbocharger - Install - Side Mounted Turbocharger
Cat® Command For Hauling Machine Swerving Is Excessive
Installation Procedure for the 493-6920 Tube Assembly on Certain C13 Commercial and Machine Engines {1304, 1315} Installation Procedure for the 493-6920 Tube Assembly on Certain C13 Commercial and Machine Engines {1304, 1315}
3512C Engine Rocker Shaft and Push Rod - Remove and Install
794 AC Off-Highway Truck Bearing (Electric Motor) - Lubricate - Drive Motor
455-1191 Top End Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1191 Top End Overhaul Foundational Kit for C18 Marine Engines{1000}
3512C Engine Electronic Unit Injector - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Rear)