C-10, C-12 and C-15 On-Highway Engines Caterpillar


Maintenance Interval Schedule - C-15 Truck Engine

Usage:

C-15 MBN

When Required

Battery - Replace
Battery or Battery Cable - Disconnect
Engine Air Cleaner Element - Clean/Replace
Engine Oil Level Gauge - Calibrate
Fuel System - Prime
Fuel System - Prime
Severe Service Application - Check

Daily

Cooling System Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel System Water Separator - Drain
Walk-Around Inspection

PM Level 1 - Every 24 000 km (15 000 miles) or 9500 L (2500 US gal) of Fuel or 300 Service Hours

Air Compressor Filter - Clean/Replace
Alternator - Inspect
Battery Electrolyte Level - Check
Belt - Inspect
Belt Tensioner - Inspect
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Cylinder Head Grounding Stud - Inspect/Clean/Tighten
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Fuel System Primary Filter - Clean/Replace
Fuel System Secondary Filter - Replace
Fuel Tank Water and Sediment - Drain
Hoses and Clamps - Inspect/Replace

Between 24 000 and 96 000 km (15 000 and 60 000 miles) (Between the First and Fourth Oil Change)

Compression Brake - Inspect/Adjust
Electronic Unit Injector - Inspect/Adjust
Engine Valve Lash - Inspect/Adjust

PM Level 2 - Every 320 000 km (200 000 miles) or 125 000 L (33 000 US gal) of Fuel or 4000 Service Hours or 2 Years

Aftercooler Core - Clean/Test
Cooling System Coolant (DEAC) - Change
Cooling System Water Temperature Regulator - Replace
Fan Drive Bearing - Lubricate
Radiator - Clean

PM Level 3 - Every 483 000 km (300 000 miles) or 190 000 L (50 000 US gal) of Fuel or 6000 Service Hours or 3 Years

Air Compressor - Inspect
Compression Brake - Inspect/Adjust/Replace
Crankshaft Vibration Damper - Inspect
Electronic Unit Injector - Inspect/Adjust
Engine - Clean
Engine Valve Lash - Inspect/Adjust
Turbocharger - Inspect

Every 483 000 km (300 000 miles) or 3 Years

Cooling System Coolant Extender (ELC) - Add

Every 966 000 km (600 000 miles) or 6 Years

Cooling System Coolant (ELC) - Change

PM Level 4 - Every 966 000 km (600 000 miles) or 380 000 L (100 000 US gal) of Fuel or 12 000 Service Hours or 6 Years

Compression Brake - Inspect/Adjust/Replace

Caterpillar Information System:

G3516 TA Engine Engine Shutdown or Start Inhibit Initiated by Driven Equipment
C-10, C-12 and C-15 On-Highway Engines Maintenance Interval Schedule - C-10 and C-12 Truck Engines
2013/12/23 New Improved Engine Control Software Is Now Available for Certain T4 Interim C13 Industrial Engines Used in Haliburton ADP Blender Applications {7610, 7620}
G3600 A4 Engines Exhaust Temperature - Test
G3600 A4 Engines General Information (Air Inlet and Exhaust System)
G3600 A4 Engines Electronic Control System Operation
345B Excavator and 345B Material Handler Machine System Specifications Track Roller Mounting
XQ375 and XQ425 Rental Generator Sets Safety Messages
2013/12/19 Flywheel UPS Parts Acquisition {1156}
Priming the Jacket Water Heater System on Certain 3500 and C175 Engines{1383} Priming the Jacket Water Heater System on Certain 3500 and C175 Engines{1383}
C18 Marine Engine Radiator - Clean
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554} Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
2013/12/20 An Alternate Fuel Pressure Gauge for Improved Durability in Some Generator Set Applications {7456}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490} Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
G3600 A4 Engines Ignition Primary - Test
G3600 A4 Engines Ignition Secondary - Test
C4.4 Marine Generator Set High Pressure Fuel Lines
2014/01/31 A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
390F Excavator Machine System System Pressure - Release
2014/02/06 A New Air Intake Hose Between the Air Cleaner and the Turbocharger is Now Available for Certain Excavators {1071}
390F Excavator Machine System Operational Checks
C4.4 Marine Generator Set Model View Illustrations
390F Excavator Machine System Travel on Level Ground - Test
390F Excavator Machine System Travel on Level Ground - Test - Optional Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.