A New Crankshaft Damper Is Used on Certain C18 Marine Engines {1205}
- Engine:
- C18 (S/N: TNA1-UP)
Description of Change: A new crankshaft damper is used on certain C18 marine engines. The new damper provides additional damping during engine operation.
Adaptable To: Refer to Table 1 for the correct part numbers.
Show/hide table
| Qty | New Part Number | Part Description |
| 1 | 213-3199 (1) | Damper |
| 2 | 167-8130 (2) | Damper |
Show/hide table
| ( 1 ) | Used on engines rated at 500 kW (670 hp) and 533 kW (715 hp) |
| ( 2 ) | Used on engines rated at 599 kW (803 hp) |
Caterpillar Information System:
C15 Petroleum Engine Reference Information
C7.1 Industrial Engine Turbocharger Exhaust Temperature Sensor - Remove and Install
C280-08 Marine Engine Engine Oil - Change
C4.4 Industrial Engine Sensors and Electrical Components
C280-08 Marine Engine Air Shutoff - Test
C280-08 Marine Engine Aftercooler Condensation - Drain
C15 Petroleum Engine Product Description
C280-08 Marine Engine Fluid Recommendations
C280-08 Marine Engine Refill Capacities
C280-08 Marine Engine Product Lifting
C280-08 Marine Engine Product Description
2013/10/10 An Improved Bearing Setting Procedure for Transfer Gears is Now Used on Certain CX31-P600 Petroleum Transmissions {3159}
2013/10/09 Proper Installation of the Wiring Harness for the Dosing Cabinet for Certain 3516C and C175 Engines {1408}
CX31-P600 Petroleum Transmission Transmission Control
793F and 793F CMD Off-Highway Truck Braking System Oil Filter (Brake)
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies DC Bus Capacitor - Replace
C280-12 Marine Engine Safety Messages
C280-12 Marine Engine Model View Illustrations
C280-12 Marine Engine Product Lifting
2013/10/17 New Engine Monitoring System III Software Is Used on Certain 3500 Generator Set Engines {1901, 1920}
G3306B Petroleum Generator Set Engines Electronic Control Module (ECM)
G3306B Petroleum Generator Set Engines Diagnostic Trouble Codes
G3306B Petroleum Generator Set Engines Air/Fuel Ratio Control - Adjust
2013/10/24 New Engine Software Is Used on Certain G3512E Engines {1920}