EMCP Not Displaying Certain Parameters for Certain G3306B Engines{4490, 7451} Caterpillar


EMCP Not Displaying Certain Parameters for Certain G3306B Engines{4490, 7451}

Usage:

G3306B RJ2
Engine:
G3306B (S/N: RJ21-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the interim corrective action that is identified below.

Problem

The EMCP 4.4 is not displaying certain gas engine-related parameters for certain G3306B Generator Set Engines.

Solution

Use the latest version of CAT ET to display parameters as needed.

Caterpillar Information System:

349F and 352F Excavators Machine System Specifications Hydraulic Oil Lines
Product Lifting Instructions For Tier 4 Engines{1000} Product Lifting Instructions For Tier 4 Engines{1000}
374F Excavator Machine System Window Wiper and Wiper Motor
C9 Petroleum Engines Fluid Recommendations
C9 Petroleum Engines Refill Capacities
G3306B Petroleum Generator Set Engines Engine Control Panel
C9 Petroleum Engines Reference Information
C9 Petroleum Engines Product Description
C4.4 Industrial Engine Reference Material
2013/11/25 Special Instructions Are Available for Installing the New Coolant Lines Group Used on Certain 3512B Petroleum Engines {1071, 1380}
Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B and 3512C Engines {1000, 1250} Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B and 3512C Engines {1000, 1250}
Loss Of Fuel Prime Causing Hard Start Issues In Certain C15 Tier 4 Interim Generator Set Engines{1250, 1256} Loss Of Fuel Prime Causing Hard Start Issues In Certain C15 Tier 4 Interim Generator Set Engines{1250, 1256}
C9 Petroleum Engines Coolant (ELC) - Change
C9 Petroleum Engines Engine Valve Lash - Check
2013/09/16 Improved Engine Oil Plugs Are Used on Certain C11 and C13 Engines {1300, 1326}
CX31-P600 Petroleum Transmission Component Location
2013/09/06 The NOx Reduction System (NRS) Intake Pressure Sensor and Diesel Particulate Filter (DPF) Inlet Pressure Sensor Has Been Improved {108F, 108R, 1439}
2013/09/16 Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606}
Retrofitting for the Dynamic Gas Blending Capability on Certain 3516B Engines{1000, 1250} Retrofitting for the Dynamic Gas Blending Capability on Certain 3516B Engines{1000, 1250}
C15 and C18 Engines for China On-Highway Phase IV Exhaust Has Excessive Black Smoke
C15 and C18 Engines for China On-Highway Phase IV ARD Fuel Supply - Test
C15 and C18 Engines for China On-Highway Phase IV Coolant Level - Test
C15 and C18 Engines for China On-Highway Phase IV Sensor Signal (Analog, Passive) - Test
C15 and C18 Engines for China On-Highway Phase IV Sensor Supply - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.