Window Wiper - Inspect/Replace
Show/hide table
Illustration 1 | g03395379 |
- Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
- Inspect the window wiper blades.
- Replace the window wiper blades if the wiper blades are worn or damaged. Replace any window wiper blade that streaks the window.
Caterpillar Information System:
794 AC Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
C175-16 Engine for 795F Series AC Off-Highway Trucks Fuel Injection Pump
3516C Petroleum Engines Engine Oil Cooler - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor - Remove and Install
2013/07/08 New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202} 424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202}
374F Excavator Monitoring System
3500 Generator Sets Product Description
C15 and C18 Engines for Caterpillar Built Machines Catalyst (SCR) - Remove and Install
C32 Generator Set Fuel Related Components in Cold Weather
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
794 AC Off-Highway Truck Windows - Clean
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install - Remote Mounted
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install - With Remote Mounted Oil Filter Base
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - Power Take Off equipped
2013/06/18 Proper Pinout Locations on Certain Atlas Copco Industrial 3512C Engines {1408}
C4.4 Industrial Engine Safety Messages
3512C Oil Well Service Engines Starting the Engine
2013/06/20 Additional Support for the Bucket Circuit Tube Assembly is Available for Certain Excavators and Mobile Hydraulic Power Units {5057}
2013/06/26 A New Precooler Hose Is Now Used on Certain C18 Tier 4 Interim Industrial Engines {105P, 7554}
2013/09/16 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512C Petroleum Engines {1250, 1280}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Reference Material
2013/06/26 Improved Ground Straps Have Been Added to the Diesel Exhaust Fluid Control Cabinet {1091, 1408}