- Generator Set:
- C32 (S/N: RNX1-UP)
- Marine Engine:
- C32 (S/N: RNY1-UP; RNZ1-UP)
Description of Change: A new 424-5199 Wiring Harness is now installed on C32 marine engines built with the 368-4961 Diode Gp .
Note: The new wiring harness is only installed on engines built without an engine mounted control panel.The 424-5199 Wiring Harness completes the primary and secondary throttle signal circuits on engines built without an engine control panel by connecting pin 23 to pin 25 and pin 22 to pin 24 at the 9X-1343 Connector Receptacle As in the 368-4961 Diode Gp .
Adaptable To: The 424-5199 Wiring Harness is adaptable back to first production on the engines listed above.
The 424-5199 Wiring Harness is not available for order but can be built as shown in Illustration 1 with the parts listed in Table 1.
For a detailed rework procedure refer to Special Instruction REHS8175 , "Procedure to Rework Primary and Secondary Throttle Circuits on Certain C32 Marine Engines ".
 | |
| Illustration 1 | g03394557 |
(1) 9X-1813 Sleeve (2) 126-1767 Connector Pin (3) 16 gauge wire - bulk | |
| Qty | New Part |
14 cm (6 inch) |
9X-1813 Sleeve |
| 4 | 126-1767 Connector Pin |
32 cm (13 inch) |
16 gauge wire - bulk |
| Effective Serial Number |
|---|
| S/N:RNX00917-UP |
| S/N:RNY02316-UP |
| S/N:RNZ01305-UP |