WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Caterpillar


Flange (Discharge) - Remove and Install

Usage:

WS223 SS BM3

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
Loctite 243 
480-7356  Discharge Flange Crowfoot 


    Illustration 1g03863593

  1. Use Tooling (B) to remove nuts (2). Remove nuts (2) and flange (discharge) (3) from fluid end (1).


    Illustration 2g03394372

  2. Remove seal (4) from flange (discharge) (3).

Installation Procedure

  1. Install flange (discharge) (3) in the reverse order of removal.

    1. Install nuts (2).

    2. Tighten nuts (2) to a torque of 644 N·m (475 lb ft).

Caterpillar Information System:

2013/06/18 A New Jumper Harness Is Now Installed on Certain C32 Marine Engine Harnesses {1408}
C7.1 Marine Generator Set Reference Material
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
2013/06/13 New Injection Assemblies Are Equipped with Flow Indicators for Certain Retrofit Selective Catalytic Reduction Systems {108I}
C175-16 Locomotive Engine Engine Oil Temperature Sensor
C32 Generator Set Voltage Regulators - R450T Automatic Voltage Regulator (AVR)
C7.1 Industrial Engine Product Storage
C13, C15, and C18 Tier 4 Final Engines Coolant Level Sensor
C175-16 and C175-20 Engines for Off-Highway Trucks Connecting Rod Bearings
C7.1 Marine Generator Set Coolant Sample (Level 1) - Obtain
New Water Pump Seal and Water Pumps Are Used on Certain 3500 and G3500 Engines {1361} New Water Pump Seal and Water Pumps Are Used on Certain 3500 and G3500 Engines {1361}
2014/05/16 New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555}
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Module - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Module - Assemble
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Filter - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Pump - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Manifold (DEF Heater) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Voltage Control (Load Protection) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
C32 Generator Set Fuel Related Components in Cold Weather
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.