Bearing (3.5 EVD or Greater) - Replace
The bearings should be replaced periodically. The recommended interval for 3.5 EVD bearings is 4 years. The bearings are contained in removable cartridges. The cartridges are replaced at the same time as the bearings. The cartridges must be positioned accurately for proper operation. Only trained personnel may perform the replacement.
Caterpillar Information System:
C13 and C15 Generator Sets Generator Operation
C7.1 Industrial Engine Maintenance Interval Schedule
C4.4 Industrial Engine Welding on Engines with Electronic Controls
C6.6 Industrial Engine After Starting Engine
C4.4 Industrial Engine Cold Weather Starting
C175-16 Locomotive Engine Housing (Front)
3516C HD Petroleum Well Service Engines Customer Specified Parameters Worksheet
3516C HD Petroleum Well Service Engines Configuration Parameters
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Oil - Change
Operation and Maintenance Instructions for 371-1681 Water Separator and Fuel Filter Gp and 424-0783 Water Separator and Fuel Filter Gp {1261, 1263} Operation and Maintenance Instructions for 371-1681 Water Separator and Fuel Filter Gp and 424-0783 Water Separator and Fuel Filter Gp {1261, 1263}
Spring Isolator Installation Instructions{1021, 7002} Spring Isolator Installation Instructions{1021, 7002}
C27 Industrial Engine and C27 Locomotive Engine Engine Oil and Filter - Change
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys DC Bus Capacitor - Replace
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Diagnostic Capabilities
3512E Tier 4 Final Engines for Land Electric Drilling Oil Pressure Is Low
Well Service Pumps Machine Operation
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Turbocharger - Remove and Install
Procedure to Troubleshoot All Refueling Pump Leaks on Certain Excavators{1295} Procedure to Troubleshoot All Refueling Pump Leaks on Certain Excavators{1295}
C13 and C15 Generator Sets Product Lifting
2013/07/01 New Flywheel Housing Assemblies and Gaskets Are Used on Certain 3500 Locomotives Engines {1157, 7555}
3512C Petroleum Engines with Dynamic Gas Blending Engine Control Switch - Test
C13 and C15 Generator Sets Product Installation
C15 and C18 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install