Water Pump - Install
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | - | 导向螺柱 M8 × 90 mm |
2 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
- 确保水泵清洁且无磨损和损坏。 如有必要,更换水泵。 清洁水泵的密封垫表面。
Show/hide table
图 1 g03434736 Show/hide table图 2 g03413498 - 清洁前盖 (1) 的密封垫表面。
- 将工具 (A) 安装到位置 (X) 中。
- 使用工具 (A) 对准新密封垫 (2) 与前盖 (1)。 将密封垫安装到前盖上。
- 对准水泵 (3) 与工具 (A)。 将水泵安装到前盖 (1) 上。
注: 确保水泵的齿轮与喷油泵的齿轮相啮合。
- 安装螺栓 (4)、 (5) 和 (6)。 参考图 1。 用手拧紧螺栓。
- 拆下工具 (A) 后安装其余螺栓。
Show/hide table
图 3 g03413499 - 按图 3 所示的顺序拧紧螺栓 (4)、螺栓 (5) 和螺栓 (6) 至扭矩为
22 N·m (195 lb in) 。 - 将软管安装到水泵进口。 牢固地拧紧软管卡箍。
- 向冷却系统加注冷却液。 有关正确的步骤,请参阅操作和保养手册, "冷却系统冷却液 - 更换"。
结束:
- 安装风扇和风扇皮带轮。 请参阅拆解和组装, "风扇 - 拆卸和安装",以了解正确的步骤。
Caterpillar Information System:
C7.1 Engines Wastegate Solenoid - Remove and Install
C7.1 Engines Vibration Damper and Pulley - Remove
C7.1 Engines Vibration Damper and Pulley - Install
C7.1 Engines Valve Mechanism Cover Base - Remove and Install
C7.1 Engines Valve Mechanism Cover - Remove and Install
C7.1 Engines Turbocharger - Remove - Turbocharger for Top Mounted Engines
C7.1 Engines Turbocharger - Install - Turbocharger for Top Mounted Engines
C7.1 Engines Turbocharger - Remove - Turbocharger for Side Mounted Engines
C7.1 Engines Turbocharger - Install - Turbocharger for Side Mounted Engines
C7.1 Engines Rocker Shaft and Pushrod - Remove
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies AC Interface PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Power Distribution PWA (MMS System Cabinet)
C7.1 Engines Water Pump - Remove
C7.1 Engines Water Separator and Fuel Filter (Primary) - Remove and Install
C7.1 Engines Water Temperature Regulator - Remove and Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System I/O PWA (MMS System Cabinet)
C9 Engine Coolant (DEAC) - Change
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System I/O Daughter PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Transformer (T1 to T3)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies 24V Power Supply (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Current Transformers (Primary, Secondary)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Circuit Breaker (K3)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies MOV Surge Protector