Vibration Damper and Pulley - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | -     | 导向螺柱 M14 x 1.5 x 100 mm     |
1     |
B     | 227-4393     | E18 Torx 套筒     | 1     |
开始:
- 拆下交流发电机皮带。 有关正确的步骤,请参阅拆解和装配, "交流发电机皮带 - 拆卸和安装"。
注: 曲轴皮带轮、减振器和曲轴适配器组件的重量约为 22 kg (48 lb)。
- 使用适当的工具,使曲轴固定不动。 使用工具 (B) 将一颗 Torx 螺钉 (1) 从曲轴皮带轮组件 (2) 上拆下。
Show/hide table
图 1 | g02368017 |
- 将工具 (A) 安装到曲轴皮带轮组件 (2) 。
- 将其余的 Torx 螺钉 (1) 从曲轴皮带轮组件 (2) 上拆下。
- 拆下曲轴皮带轮组件 (2) 。
- 拆下工具 (A) 。
- 如有必要,按照步骤 6.a 至步骤 6.b 将摩擦片 (3) 从曲轴上拆下。
- 将前油封从前盖上拆下。 有关正确的步骤,请参阅拆解和组装, "曲轴前油封 - 拆卸和安装"。
- 拆下摩擦片 (3) 。
Show/hide table
图 2 | g02368018 |
- 必要时,遵循步骤 7.a 至步骤 7.c 将减振器、曲轴皮带轮从曲轴适配器上拆解下来。
- 将曲轴皮带轮组件放置在适当的支撑上。
- 从曲轴皮带轮组件 (2) 上拆下螺栓 (7) 。
- 将减振器 (6) 和曲轴皮带轮 (5) 从适配器 (4) 上拆下。
Caterpillar Information System:
C7.1 Engines Vibration Damper and Pulley - Install
C7.1 Engines Valve Mechanism Cover Base - Remove and Install
C7.1 Engines Valve Mechanism Cover - Remove and Install
C7.1 Engines Turbocharger - Remove - Turbocharger for Top Mounted Engines
C7.1 Engines Turbocharger - Install - Turbocharger for Top Mounted Engines
C7.1 Engines Turbocharger - Remove - Turbocharger for Side Mounted Engines
C7.1 Engines Turbocharger - Install - Turbocharger for Side Mounted Engines
C7.1 Engines Rocker Shaft and Pushrod - Remove
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies AC Interface PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Power Distribution PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Parallel Cabinet Interface PWA
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Parallel Cabinet Controller PWA
C7.1 Engines Wastegate Solenoid - Remove and Install
C7.1 Engines Water Pump - Install
C7.1 Engines Water Pump - Remove
C7.1 Engines Water Separator and Fuel Filter (Primary) - Remove and Install
C7.1 Engines Water Temperature Regulator - Remove and Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System I/O PWA (MMS System Cabinet)
C9 Engine Coolant (DEAC) - Change
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System I/O Daughter PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Transformer (T1 to T3)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies 24V Power Supply (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Current Transformers (Primary, Secondary)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan (MMS System Cabinet)