Pressure Sensor (Engine Coolant) - Remove and Install - Auxiliary Water Pump Pressure Sensor
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect harness assembly (3).
- Remove coolant pressure sensor (2) from the auxiliary water pump.
Show/hide table
Illustration 2 g03358551 Typical Example - Remove and discard O-ring seal (4) from coolant pressure sensor (2).
Show/hide table
| |
| Illustration 1 | g03358557 |
- Install coolant pressure sensor (1) in the reverse order of removal.
- Tighten coolant pressure sensor (1) to a torque of
10 ± 2 N·m (89 ± 18 lb in)
- Tighten coolant pressure sensor (1) to a torque of
Caterpillar Information System:
G3500H 50Hz Generator Sets Starting the Engine
C7.1 Marine Engine Engine Oil Temperature Sensor - Remove and Install
C7.1 Marine Engine Fuel Temperature Sensor - Remove and Install
C3.4B Industrial Engine Flexible Exhaust Pipe
374F Excavator Hydraulic System Electronic Control (Main Pump System)
2013/10/17 Improved Water Manifold Gaskets Are Used on Certain 3500 Engines {1124, 1380, 7555}
2013/10/16 Improved Water Manifold Gaskets Are Used for Certain 3500 Machine Engines {1124, 1380, 7555}
Marine Engine Control Panel I Dimensions
C3.4B Industrial Engine Diesel Particulate Filter - Wall Flow Diesel Particulate Filter (DPF)
Marine Engine Control Panel I General Information
349E Excavator Machine System Specifications Hydraulic Filter and Lines
C4.4 and C7.1 Engines Valve Lash Is Excessive
2013/07/22 New Exhaust Manifold Seals Are Available for Certain 3500 Engines {1059, 7555}
C3.4B Industrial Engine Diesel Particulate Filter - Through Flow Diesel Particulate Filter (DPF)
C280-16 Engine Barring Device - Lubricate
G3500H 60Hz Generator Sets Generator Load - Check
C7.1 Marine Engine Pressure Sensor (Engine Coolant) - Remove and Install - Engine Cooling System Pressure Sensor
G3500H 60Hz Generator Sets Generator Set - Test
G3500H 50Hz Generator Sets Overhaul (Major)
C280-16 Engine Sensors and Electrical Components
G3408 and G3412 Engines Stator Winding Temperature - Test
G3512H and G3516H Generator Set Engines Exhaust Elbow - Remove and Install
G3500H 50Hz Generator Sets Overhaul (Top End)
3512E Tier 4 Final Engines for Land Electric Drilling System Overview