Use Nickel Anti-Seize When Installing Thermocouples on Engines {7498, 7555}
- Generator Set:
- C175-16 (S/N: WYB1-UP)
- Engine:
- 3512C (S/N: TKP1-UP; T3P1-UP; T3R1-UP; T3S1-UP; T3W1-UP)
- Generator Set:
- CG170-16 (S/N: KSJ1-UP)
- Petroleum Engine:
- 3516C (S/N: PES1-UP)
- Power Module:
- G3516 (S/N: JKK1-UP)
- 3516C (S/N: TKS1-UP)
- CG137-08 (S/N: WWF1-UP)
- CG137-12 (S/N: WRX1-UP)
- G3512E (S/N: SSR1-UP; NGS1-UP)
- G3516C (S/N: GSB1-UP)
- G3516C (S/N: TJB1-UP)
- G3516C (S/N: GZC1-UP)
- G3516C (S/N: TJC1-UP)
- G3516C (S/N: F6D1-UP; F6E1-UP; F6F1-UP; GZZ1-UP)
- G3516E (S/N: F6G1-UP; GAS1-UP; SLY1-UP)
- G3520C (S/N: GZA1-UP; GZB1-UP; GZJ1-UP; GZK1-UP; GZL1-UP; GZM1-UP; GZN1-UP; RLP1-UP; LGS1-UP)
- G3520E (S/N: GZE1-UP; GZG1-UP; GZH1-UP)
Using nickel anti-seize when installing thermocouples on an engine prevents seizure of the thermocouple in the fitting. Loctite Nickel Anti-Seize prevents corrosion, seizing, and galling in temperature up to 1315° C (2400° F).
Part number 337-7965 Anti-seize is no longer available through the Cat Parts System. The anti-seize can be ordered through the Loctite website at the following address :
- http://useloctite.com/caterpillar/
- Item 77164
The use of nickel anti-seize is effective for all engines that use thermocouples, not only the above serial numbers.
Caterpillar Information System:
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Torque Converter from Transmission, Output Transfer Gears - Separate
349F and 352F Excavators Machine System Specifications Pilot Lines
3516B Engine for the MT4400D Off-Highway Truck Cover Group (Rear Housing)
374F Excavator Machine System Oil Filter (Hydraulic)
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Fuel Injection Lines
C7.1 Marine Engine Fuel Injection Lines - Remove and Install - Double Wall Fuel Injection Lines
C7.1 Marine Engine Fuel Injection Lines - Remove and Install - Non M.C.S. Fuel Injection Lines
C18 Marine Engines Diagnostic Trouble Codes
C7.1 Marine Engine Air Starting Motor - Remove and Install
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Boost Pressure Sensor
G3500H 50Hz Generator Sets Additional Messages
2013/03/29 Improved VisionLinkTM Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606}
349F and 352F Excavators Machine System Specifications Hoist Solenoid Valve
G3512H and G3516H Generator Set Engines Electronic Control Module (Engine) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Torque Converter to Transmission, Output Transfer Gears - Connect
C7.1 Marine Engine Aftercooler - Remove and Install - Keel-Cooled
C7.1 Marine Engine Heat Exchanger - Remove and Install - Sea Water Cooled Engine
C9.3 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install
2013/06/13 A New Compressor Bypass Actuator is Used on Certain G3500B Engines {1803, 5510}
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Pressure Sensor (Motor Inlet)
C7.1 Marine Engine Heat Exchanger - Disassemble - Sea Water Cooled Engine
C9.3 Engines for Caterpillar Built Machines Nozzle Heater Harness - Remove and Install
G3512H and G3516H Generator Set Engines Turbocharger - Disassemble - Dual Turbochargers
C3.3B Engines for Caterpillar Built Machines General Information