C7.1 Engines for Caterpillar Built Machines Caterpillar


Fuel Injection Lines

Usage:

525D 2L5

------ WARNING! ------

Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.


Refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" before adjustments and repairs are performed.


NOTICE

Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.


Ensure that all adjustments and repairs are performed by authorized personnel that have had the correct training.



Illustration 1g03345356
Typical example

(1) ( 2) Tighten the nuts on the fuel injection lines to the following torque. ... 30 N·m (22 lb ft)

(3) Tighten the screws for the clamps to the following torque. ... 2 N·m (18 lb in)

Caterpillar Information System:

Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Set
Procedure to Install Water Delivery System (Retrofit) (S/N: M6J) on the 777G WTR {5612, 7000} Procedure to Install Water Delivery System (Retrofit) (S/N: M6J) on the 777G WTR {5612, 7000}
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
C18 Marine Propulsion Engines Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines Water Pump
C7.1 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C7.1 Engines for Caterpillar Built Machines Valve Mechanism Cover
C7.1 Industrial Engine Sensors and Electrical Components
C4.4 Industrial Engine Monitoring System
C4.4 Industrial Engine Gauges and Indicators
C4.4 Industrial Engine Product Lifting
C18 Marine Propulsion Engines Turbocharger
C7.1 Engines for Caterpillar Built Machines Engine Design
Installing the 387-8211 Thermostatic Valve Gp and the 387-8214 Thermostatic Valve Gp onto C175 Engines{135V, 7610} Installing the 387-8211 Thermostatic Valve Gp and the 387-8214 Thermostatic Valve Gp onto C175 Engines{135V, 7610}
C18 Industrial Engine Air Shutoff - Test
C18 Industrial Engine Coolant Level - Test
C18 Industrial Engine Data Link Configuration Status - Test
C18 Industrial Engine Electrical Power Supply - Test
C11, C13, C15, and C18 Industrial Engines Ether Starting Aid - Test
C32 Generator Set Declaration of Conformity
C18 Industrial Engine Injector Solenoid - Test
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Configuration Parameters
2013/02/27 A New Bracket Is Available for Certain C18 Marine Engines Equipped with Right Hand Service Duplex Fuel Filter Arrangements {1261}
C7.1 Marine Engine Pistons and Connecting Rods - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.