Camshaft Gear - Remove and Install
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-0510 | 冲头总成 | 1 |
| B | 8B-7551 | 拉拔器组件 | 1 |
| C | 8H-0663 | 轴承拉拔器 | 1 |
开始:
- 拆下凸轮轴。
注: 请参阅技术规格 UENR3421 "发动机设计"，了解非指定的发动机扭矩值。
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
- 使用工具 (A) 从凸轮轴 (2) 上拆下凸轮轴齿轮 (1)。
- 如有必要，加热滚柱轴承的座圈 (3) 以便进行拆卸。
Show/hide table
图 2 g02796779 - 将板 (5) 从凸轮轴 (2) 上拆下。
- 如有必要，将键 (4) 从凸轮轴 (2) 前端拆下。
Show/hide table
| |
| 图 1 | g02796778 |
- 按与拆卸相反的顺序安装凸轮轴齿轮 (1)。
- 使用工具 (B) 和工具 (C) 将凸轮轴齿轮 (1) 安装到凸轮轴 (2) 上。
- 确保凸轮轴齿轮和键清洁且无磨损和损坏。
Show/hide table
图 3 g02807848
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C3.3B Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Remove
C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
C3.3B Engines for Caterpillar Built Machines V-Belts - Remove and Install
C3.3B Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C27 and C32 Tier 4 Final Marine Engines Alternator and Regulator
C4.4 and C7.1 Engines System Overview
C3.3B Engines for Caterpillar Built Machines Camshaft and Valve Lifters - Remove and Install
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C3.3B Engines for Caterpillar Built Machines Rocker Shaft and Push Rod - Remove and Install
C9.3 Tier 4 Final Engines Component Location
PM3516 Power Modules Belts - Inspect/Adjust/Replace
2014/05/30 An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
2014/05/30 Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
C1.5 and C2.2 Engines for Caterpillar Built Machines Diesel Particulate Filter - Clean
C3.3B Engines for Caterpillar Built Machines Bridge Dowels - Remove and Install
C3.3B Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000} HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}