Crankshaft and Main Bearings - Remove
开始:
- 拆下油底壳。
- 拆下飞轮壳体。
- 拆卸前壳体。
- 将螺栓 (3) 和连杆盖 (2) 从曲轴 (1) 上拆下。
Show/hide table
图 2 g02802425 - 拆下螺栓 (4)。
- 将八个主螺栓 (5) 从曲轴 (1) 上拆下。 翻转缸体并拆下两个主螺栓 (5)。
Show/hide table
图 3 g02802426 Show/hide table
图 4 g02802428 - 使用合适的起吊设备将上部缸体 (7) 从下部缸体 (6) 上拆下。
- 如有必要，将上部主轴承 (8) 从曲轴 (1) 上拆下。
Show/hide table
图 5 g02802431 Show/hide table
图 6 g02802433 - 将两个上半部分止推轴承 (9) 和两个下半部分止推轴承 (10) 从曲轴 (1) 上拆下。
Show/hide table
图 7 g02802435 - 使用合适的起吊设备拆下曲轴 (1)。 曲轴 (1) 的重量约为
25 kg (55 lb) Show/hide table
图 8 g02802437 - 将下半部分主轴承 (11) 从下半部分缸体 (6) 上拆下。
注: 检查曲轴主轴承的状况。 请参阅可复用零件操作指南, SEBF8009, "主轴承和连杆轴承"或参阅可复用零件操作指南, SEBV0544, "发动机轴承和曲轴"。
Show/hide table
| |
| 图 1 | g02802423 |
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
C3.3B Engines for Caterpillar Built Machines V-Belts - Remove and Install
C3.3B Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C27 and C32 Tier 4 Final Marine Engines Alternator and Regulator
C4.4 and C7.1 Engines System Overview
C4.4 and C7.1 Engines Welding Precaution
2013/01/16 New Software is Used For C175-16 Petroleum Engines {1901, 1920}
C3.3B Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
C32 Marine Engine Configuration Parameters
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057} Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
C32 Marine Engine Engine Air Cleaner Service Indicator - Inspect
3500C Marine Engines Engine Design
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Install
C3.3B Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C3.3B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft and Valve Lifters - Remove and Install
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C3.3B Engines for Caterpillar Built Machines Rocker Shaft and Push Rod - Remove and Install
C9.3 Tier 4 Final Engines Component Location