Alternator and Regulator
Show/hide table
 | |
| 图 1 | g03337904 |
Show/hide table
| 362-3375 充电交流发电机总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 6V-8187 螺母 | 对于 (B+) 接线端，使用 7/16 环形端子。 (B+) 接线端。 最终安装扭矩为 7.0 ± 0.8 N·m (62.0 ± 7.1 lb in)。 |
| 2 | 1 | 4B-2047 螺母 | 最终安装扭矩为 2.2 ± 0.5 N·m (19.5 ± 4.4 lb in)。 |
| 3 | 1 | 6V-8187 螺母 | (B-) 接线端。 最终安装扭矩为 7.0 ± 0.8 N·m (62.0 ± 7.1 lb in)。 |
| 4 | 1 | 187-2034 法兰螺母 | 最终安装扭矩为 102 ± 7 N·m (75 ± 5 lb ft)。 |
| - | - | - | 电压为 24 V。 |
| - | - | - | 电流为 105 安培。 |
| - | - | - | 极性为负极接地。 |
| - | - | - | 可朝顺时针或逆时针方向转动。 |
| - | - | - | 最大起动转速为 2000 rpm。 |
| - | - | - | 25 °C (77 °F) 时的交流发电机性能为： |
| 5000 rpm 时的最小满载电流为 105 安培。 | |||
| 2000 rpm 时的最小满载电流为 39 安培。 | |||
| 输出电压为 28 ± 1 V。 | |||
Caterpillar Information System:
C4.4 and C7.1 Engines System Overview
C4.4 and C7.1 Engines Welding Precaution
2013/01/16 New Software is Used For C175-16 Petroleum Engines {1901, 1920}
C3.3B Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
C32 Marine Engine Configuration Parameters
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057} Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
C32 Marine Engine Engine Air Cleaner Service Indicator - Inspect
3500C Marine Engines Engine Design
308E CR Mini Hydraulic Excavator Machine System Specifications Coupler Lines
3500C Marine Engines Engine Design
3500B Locomotive Engines Engine Design
3500C Marine Engines Engine Design
C3.3B Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C3.3B Engines for Caterpillar Built Machines V-Belts - Remove and Install
C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Remove
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Install
C3.3B Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C3.3B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft and Valve Lifters - Remove and Install