1989/09/01 Caterpillar


Plasma Top Piston Rings Replace Chrome Rings

Usage:


3400 Family Of Engines

Reference: Truck Engine News, June 1988, Page 3, "Piston Application Guide."

Reference: 3400 Engine Major Component Performance Guide; SEBD0794.

Chrome top piston rings are no longer used on 3400 Engines. The chrome top piston ring has been replaced with a plasma top piston ring. The plasma top rings are more scuff resistant than the chrome top rings. However, since the plasma coating is more abrasive than cast iron, liner wear at the top ring turn-around point may increase when plasma top rings are used.

Low speed (1800 rpm or slower) marine engines changed to plasma top rings effective with 3412 Marine Engine 60M3696 and 3408 Marine Engine 99U6169. Chrome top rings have not been used in low horsepower truck engines effective with 3406B Truck Engine 7FB87310.

The chrome top rings have also been removed from service ring kits. However, the 2W1521 Chrome Top Ring is still available for Parts Service, if desired, for rebuild where liner reusability is a major concern.

Caterpillar Information System:

1989/08/01 New Directory For Performance Analysis Report (PAR) Dealers (North America)
1989/08/01 New Coolant Conditioner Elements Available
1989/08/01 Pedal-Mounted Throttle Sensor Requires New Personality Module
1989/08/01 Use New Operation And Maintenance Manuals
1989/08/01 Connecting Rod Bearing Maintenance
1989/08/01 New Connecting Rod Bearing Used
1989/08/01 Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/07/01 PEEC Training And Diagnostic Training Program Available
1989/07/01 Change Routing Of Heater Return Hose To Improve Heater Efficiency
1989/07/01 Air Vent Line Improves Cooling System Performance
1989/07/01 Subscription Service Available For ECAP And DDT Service Program Modules
1989/07/01 Separate Grounding Of Throttle Limit Switch And Shutoff Solenoid Improves Component Reliability; New Throttle Limit Switch Used
1989/09/01 List Of Service Publications
1989/09/01 New Service Tools Available
1989/10/01 Engine Coolant Can Be Recycled
1989/10/01 New Service Tools Available
1989/10/01 Service Program Modules Must Be Ordered By Literature Form Numbers
1989/10/01 New Connecting Rod And Main Bearing Kits Available
1989/11/01 Effective Dates, Serial Numbers And Features Of PEEC Personality Modules
1989/11/01 Electrostatic Painting And/Or Incorrect Welding Can Cause Permanent Damage To Electronic Control Module (ECM)
1989/11/01 Failures Of Unit Injector O-Ring Seals
1989/12/01 New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01 Additional Information For Checking Valve Camshaft Timing
1989/12/01 New Turbocharger, Piston And Fuel Ratio Control Used
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.