Fuel Injector
Show/hide table
Illustration 1 | g03330713 |
Show/hide table
Illustration 2 | g03330711 |
Exhaust side of the cylinder head |
Show/hide table
Illustration 3 | g03330714 |
Show/hide table
Illustration 4 | g03330712 |
Intake side of the cylinder head |
Show/hide table
Specification for 378-5388 Fuel Injection Pump Gp and 376-3432 Fuel Injection Pump Gp | |||
Item | Qty | Part | Specification Description |
- | - | - | Use the following procedure in order to install the fuel injector group: |
1. Lubricate seals (4) with clean engine oil. Lubricate the injector bore (6) with clean engine oil. | |||
2. Place the injector into the bore. The pin (3) of the injector fits into the groove (5) of the cylinder head. | |||
3. Place the fuel injector clamp (2) with the label "C9" in the UP position. | |||
4. When the injector hits the bottom of the bore, torque the bolt (1) to standard torque. | |||
5. Lubricate the bore and the nut of the quill assembly with clean engine oil. Also, lubricate the threads in the cylinder head with clean engine oil. | |||
6. Insert the quill assembly (7) completely into the cylinder head. Ensure that the ball (8) of the quill assembly is in line with the slot (10) of the cylinder head. | |||
9 | 1 | 278-5519 Nut | Torque to |
Caterpillar Information System:
C13 Tier 4 Final Engines Radiator
TA2 Inspection for C18 Marine Engine{1000} TA2 Inspection for C18 Marine Engine{1000}
2013/04/22 New Software Is Now Available For Product Link 522 Systems On All Cat® Products {7606, 7620}
2012/12/19 A New Harness Is Available to Help Prevent False Detonation Events for G3600 Engines with the Engine Supervisory System (ESS) {1000, 1408}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Exhaust Temperature - Test
PM3516 Power Modules Coolant Sample (Level 2) - Obtain
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Engine Shutdown Override Occurrence
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Engine Shutdown Occurrence
NRS Cooler Mounting Straps Must be Replaced After Removal{1061, 1087, 108C} NRS Cooler Mounting Straps Must be Replaced After Removal{1061, 1087, 108C}
C13 Tier 4 Final Engines Exhaust Elbow
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Air Cleaner
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is High - Diesel System
C9.3 Tier 4 Final Engines Flywheel
C9.3B Engines Alternator and Regulator
C9.3 Tier 4 Final Engines Flywheel
C1.5 and C2.2 Industrial Engines Burn Prevention
D6T Track Type Tractor Machine Systems Fuel Lines
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines (DPF Inlet)
419-8235 Major Engine Overhaul Kit for 3412D Marine Engines{1000} 419-8235 Major Engine Overhaul Kit for 3412D Marine Engines{1000}
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
2013/08/26 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3516B Engines {1000, 1250}
PM3516 Power Modules Refill Capacities
PM3516 Power Modules Fluid Recommendations
2012/12/11 A New Valve Body Is Used on Certain C32 Marine Engines {1306, 1308}