Engine Shutdown Override Occurrence
使用本步骤对下述任一发动机诊断代码进行故障诊断与排除。
Show/hide table
诊断代码表     | ||
---|---|---|
J1939 代码和描述     | 产生代码的状况     | 系统响应     |
971-31 发动机减额开关     |
当任意发动机减额启用时,发动机停机超越开关激活。 (1)     | 电子控制模块 (ECM) 将暂停停机开关发送的任何关停发动机的请求。     |
1237-31 发动机停机超越     |
发动机停机超越开关激活时,任意发动机停机开关激活。 (1) 注:停机超越开关激活不会停用因发动机超速状况引发的发动机停机。     |
Show/hide table
( 1 ) | 控制面板通过 CAN 数据链路发送请求可以激活此代码以便执行相关作业。 |
可能原因
发动机停机超越开关
- 发动机停机超越开关激活
- 发动机停机超越开关电路故障
建议的措施
注: 下面以概率的先后顺序列出了这些步骤。 依次完成这些步骤。
Show/hide table
故障诊断与排除测试步骤     | 数值     | 结果     |
---|---|---|
1. 检查代码 A. 将 Caterpillar 电子技师(ET)连接到维修工具接头上。 如有必要,请参阅故障诊断与排除, "电子维修工具"。 B. 在执行任何故障诊断与排除或清除故障诊断代码前,从发动机 ECM 下载"产品状态报告"。 C. 确定指向此步骤的故障诊断代码是否存在。 D. 针对指向此步骤的事件代码,检查有无系统相关的激活的诊断代码。     |
971-31 或 1237-31     |
结果:存在相关代码。 修理:在继续进行此测试前,诊断并排除所有相关代码。 结果:971-31 或 1237-31 激活。 转至下一步。 结果:没有激活的代码 停止     |
2. 启动停机开关 A. 与操作员沟通,确定紧急停机关闭的原因。     |
开关     |
结果:紧急停机启动。 复位停机开关。 确认紧急停机开关的情况得以解决。 通过循环钥匙开关复位控制系统。 结果:紧急停机未启动。 转至下一步     |
3. 检查停机开关电路 A. 检查停机开关有无振动、潮气或腐蚀引起的损坏迹象。 检查停机开关电路。 请参阅故障诊断与排除, "开关电路 - 测试"。     |
回路     |
结果:停机开关电路损坏。 修理:诊断故障后修理故障。 确认修理后故障得到排除。     |
Caterpillar Information System:
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Engine Shutdown Occurrence
NRS Cooler Mounting Straps Must be Replaced After Removal{1061, 1087, 108C} NRS Cooler Mounting Straps Must be Replaced After Removal{1061, 1087, 108C}
C13 Tier 4 Final Engines Exhaust Elbow
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Air Cleaner
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is High - Diesel System
419-8232 Major Engine Overhaul Kit for 3412C Marine Engines{1000} 419-8232 Major Engine Overhaul Kit for 3412C Marine Engines{1000}
C13 Tier 4 Final Engines Gear Group (Rear)
374F Excavator Machine System Joystick Control
2012/12/10 3412 Marine Engine Overhaul Kits Are Available for Top End and Major Overhauls {1000}
PM3516 Power Modules Coolant (ELC) - Change
PM3516 Power Modules Coolant (DEAC) - Change
2012/12/21 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, and C15 Engines {1206}
PM3516 Power Modules Coolant Sample (Level 2) - Obtain
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Exhaust Temperature - Test
2012/12/19 A New Harness Is Available to Help Prevent False Detonation Events for G3600 Engines with the Engine Supervisory System (ESS) {1000, 1408}
2013/04/22 New Software Is Now Available For Product Link 522 Systems On All Cat® Products {7606, 7620}
TA2 Inspection for C18 Marine Engine{1000} TA2 Inspection for C18 Marine Engine{1000}
C13 Tier 4 Final Engines Radiator
C13, C15, and C18 Tier 4 Final Engines Fuel Injector
C9.3 Tier 4 Final Engines Flywheel
C9.3B Engines Alternator and Regulator
C9.3 Tier 4 Final Engines Flywheel
C1.5 and C2.2 Industrial Engines Burn Prevention
D6T Track Type Tractor Machine Systems Fuel Lines