3500B Engines Caterpillar

Generator Mount

Usage:

3508B LD7

Show/hide table




Illustration 1	g03328452

Show/hide table

Table 1
Specification for 396-8056 Generator Mounting Gp
Item	Qty	Part	Specification Description
Item	Qty	Part	As required , use the following shims:
1	4	4P-7526 Shim	Thickness is 8 mm (0.3 inch).
2	4	132-9514 Shim	Thickness is 4 mm (0.2 inch).
3	4	333-9113 Shim Pack	333-9113 Shim Pack consists of following shims:
			Thickness of 137-8534 Shim is 0.0254 mm (0.00100 inch).
			Thickness of 137-8535 Shim is 0.0508 mm (0.00200 inch).
			Thickness of 137-8536 Shim is 0.0762 mm (0.00300 inch).
			Thickness of 137-8537 Shim is 0.1016 mm (0.00400 inch).
			Thickness of 137-8538 Shim is 0.12 mm (0.005 inch).
			Thickness of 137-8539 Shim is 0.254 mm (0.0100inch).
			Thickness of 137-8540 Shim is 0.381 mm (0.0150inch).
			Thickness of 137-8541 Shim is 0.508 mm (0.0200 inch).
			Thickness of 137-8542 Shim is 0.635 mm (0.0250 inch).
			Thickness of 137-8543 Shim is 1.27 mm (0.050 inch).
			Thickness of 137-8544 Shim is 1.91 mm (0.075 inch)
			Thickness of 137-8545 Shim is 2.54 mm (0.100 inch).
			Thickness of 137-8546 Shim is 3.05 mm (0.120 inch).
			Thickness of 331-6585 Shim is 6.35 mm (0.250 inch).

Caterpillar Information System:

3500B Engines Exhaust Elbow

3500B Engines Jacket Water Heater Mount

3500B Engines Belt Guard

3500B Engines Coupling Guard

3500 Generator Set Engines Radiator Mounting

3500 Generator Set Engines Radiator Mounting

3500C Marine Engines Coupling Guard

3500 Generator Set Engines Auxiliary Water Pump

C280 Marine and Petroleum Engines Engine Does Not Crank

C280 Marine Engines Electrical Connectors

C280 Marine and Petroleum Engines Coolant Contains Oil

3516B Engine Fan Drive (Hydraulic) - Install

3500B Engines Jacket Water Heater Mount

2012/12/06 Special Instruction, REHS7132, "Coolant Line Upgrade for the Exhaust System Components on a G3516B Engine" Is Available {1050, 1059, 1061, 1380}

2014/03/07 Special Instructions Are Available for Retrofitting the Low Emission Kits on Certain G3516 1400 RPM Engines {775E}

2013/07/11 A New Relief Valve Group for the Control Valve Group is Now Used on Certain Off-Highway Trucks {5051, 5069, 5117}

Installation and Initial Start-Up Procedure for CG137-08 and CG137-12 Engines {1000} Installation and Initial Start-Up Procedure for CG137-08 and CG137-12 Engines {1000}

C32 Auxiliary Engine Heat Exchanger - Inspect - If Equipped

320D2 Excavator Seat

C32 Auxiliary Engine Aftercooler Core - Inspect

3516B Generator Set Engines with Dynamic Gas Blending Exhaust Has Excessive Black Smoke

3516B Generator Set Engines with Dynamic Gas Blending Engine Vibration Is Excessive

C280 Marine and Petroleum Engines Engine Stalls at Low RPM

C280 Marine and Petroleum Engines Valve Lash Is Excessive