Gear Group (Front)
Show/hide table
| |
| 图 1 | g03194916 |
Show/hide table
| 技术规格 - 377-5906 前齿轮总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 7N-5245 泵过渡接头 | 安装后， 127-5400 衬套的孔径为 |
| 2 | 1 | 155-2307 惰轮组件 | 安装后， 116-1365 衬套的孔径为 安装深度为 |
| 3 | 1 | 151-0149 惰轮轴 | 直径为 |
| 4 | 2 | 259-4598 O 形密封圈 | 组装前，用密封的润滑剂稍稍润滑孔。 |
| 5 | 1 | 7N-5239 泵驱动轴组件 | 直径为 将 8T-2153 内六角头调整螺钉安装到螺纹孔底部，并拧紧至扭矩 |
| 6 | 1 | 235-3546 O 形密封圈 | 组装前，用密封的润滑剂稍稍润滑孔。 |
| 7 | 1 | 164-4995 垫圈组件 | 164-4996 止推垫圈的厚度为 7N-2047 定位销的突出量为 |
| 8 | 2 | 7N-5246 止推垫圈 | 厚度为 新泵驱动轴组件的槽宽度为 |
| 9 | 1 | 278-4287 泵过渡接头 | 安装后， 127-5400 衬套的孔径为 组装期间，使衬套与泵适配器表面平齐。 衬套中的油孔必须对缸孔上的孔对齐。 |
Caterpillar Information System:
G3500 Engines Cylinder Head Valves
G3500 Engines Auxiliary Water Pump
2012/10/24 New Engine Software Is Now Used on Certain C27 Generator Sets {1901, 1920}
C175-16 Locomotive Engine Fuel Transfer Pump - Remove
C175-16 Locomotive Engine Fuel Priming Pump - Remove and Install
Procedure to Inspect EMCP 4.2 RS485 Remote Annunciator Interface Harness On Certain 3512 and 3516 Generator Sets{1408, 4490, 7400} Procedure to Inspect EMCP 4.2 RS485 Remote Annunciator Interface Harness On Certain 3512 and 3516 Generator Sets{1408, 4490, 7400}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459} 185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
C175-16 Locomotive Engine Data Link - Test
3516B Engine Fuel Manifold - Remove and Install
3516B Engine Cylinder Liner - Remove
C175-16 Locomotive Engine Fuel Filter Housing - Install
C18 Marine Auxiliary and Marine Generator Set Engines Oil Contains Coolant
C7.1 Marine Generator Set High Pressure Fuel Lines
C7.1 Industrial Engine Exhaust Back Pressure Valve - Remove and Install
C7.1 Marine Generator Set Model View Illustrations
C13 Tier 4 Final Engines Gear Group (Front) - Time
C32 Marine Generator Set Engine Air Cleaner Element (Single Element) - Inspect/Replace
2012/09/07 Serviceability of Connecting Rod Bearings in Type 2 C175 Engines {1219}
C7.1 Marine Generator Set Product Description
C7.1 Marine Generator Set Plate Locations and Film Locations
C13 Tier 4 Final Engines Air Inlet and Exhaust System - Inspect
C7.1 Marine Generator Set Product Lifting
C32 Auxiliary Engine Manual Stop Procedure
C32 Marine Generator Set Product Description