Fuel Priming Pump - Remove and Install
- Turn the fuel supply to the OFF position.
Show/hide table
Illustration 1 g02883202 - Disconnect hose assemblies (1) and (3). Disconnect harness assembly (2). Remove bolts (5). Remove fuel priming pump (4).
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install fuel priming pump (5) in the reverse order of removal.
- Turn the fuel supply to the ON position.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Caterpillar Information System:
Procedure to Inspect EMCP 4.2 RS485 Remote Annunciator Interface Harness On Certain 3512 and 3516 Generator Sets{1408, 4490, 7400} Procedure to Inspect EMCP 4.2 RS485 Remote Annunciator Interface Harness On Certain 3512 and 3516 Generator Sets{1408, 4490, 7400}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459} 185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
C175-16 Locomotive Engine Data Link - Test
3516B Engine Fuel Manifold - Remove and Install
3516B Engine Cylinder Liner - Remove
C175-16 Locomotive Engine Fuel Filter Housing - Install
C18 Marine Auxiliary and Marine Generator Set Engines Oil Contains Coolant
G3500 Engines Cylinder Head Valves
2012/08/23 Exhaust Cooler (NRS) for C7.1 Engines {108G}
3500B and 3500C Marine Engines Water Pump
C7.1 Industrial Engine Flywheel Housing - Remove and Install - Flywheel Housing that is Equipped with Rear Power Take-Off
G3500 Engines Cylinder Head Valves
C175-16 Locomotive Engine Fuel Transfer Pump - Remove
2012/10/24 New Engine Software Is Now Used on Certain C27 Generator Sets {1901, 1920}
G3500 Engines Auxiliary Water Pump
G3500 Engines Cylinder Head Valves
G3516 Engines Gear Group (Front)
C7.1 Marine Generator Set High Pressure Fuel Lines
C7.1 Industrial Engine Exhaust Back Pressure Valve - Remove and Install
C7.1 Marine Generator Set Model View Illustrations
C13 Tier 4 Final Engines Gear Group (Front) - Time
C32 Marine Generator Set Engine Air Cleaner Element (Single Element) - Inspect/Replace
2012/09/07 Serviceability of Connecting Rod Bearings in Type 2 C175 Engines {1219}
C7.1 Marine Generator Set Product Description