Auxiliary Water Pump
Show/hide table
| |
| Illustration 1 | g03194756 |
Show/hide table
| Specification for 378-7411 Auxiliary Water Pump Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 5N-4383 Thrust Washer | Thickness of the new thrust washer is Width (A) of groove in the shaft for thrust washer is |
| 2 | 1 | 9X-4594 Lip Type Seal | Do not lubricate the sealing lip of the lip type seal. |
| 3 | 1 | 235-3546 O-Ring Seal | Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
| 4 | 1 | 9M-3786 O-Ring Seal | Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
| 5 | 1 | 212-8183 Impeller | Bore in the impeller for the shaft is |
| 6 | 1 | 212-8179 Shaft | Lubricate the shaft with a thin film of clean engine oil before pressing the impeller (5) onto the shaft. The end of the shaft must be flush with the face of the impeller within Diameter of the shaft to the impeller end is |
| 7 | 1 | 127-5400 Bushing | After assembly, bore in the bushing for auxiliary drive shaft is Installation depth (B) is |
Caterpillar Information System:
2012/10/24 New Engine Software Is Now Used on Certain C27 Generator Sets {1901, 1920}
C175-16 Locomotive Engine Fuel Transfer Pump - Remove
C175-16 Locomotive Engine Fuel Priming Pump - Remove and Install
Procedure to Inspect EMCP 4.2 RS485 Remote Annunciator Interface Harness On Certain 3512 and 3516 Generator Sets{1408, 4490, 7400} Procedure to Inspect EMCP 4.2 RS485 Remote Annunciator Interface Harness On Certain 3512 and 3516 Generator Sets{1408, 4490, 7400}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459} 185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
C175-16 Locomotive Engine Data Link - Test
3516B Engine Fuel Manifold - Remove and Install
3516B Engine Cylinder Liner - Remove
C175-16 Locomotive Engine Fuel Filter Housing - Install
C18 Marine Auxiliary and Marine Generator Set Engines Oil Contains Coolant
G3500 Engines Cylinder Head Valves
2012/08/23 Exhaust Cooler (NRS) for C7.1 Engines {108G}
G3500 Engines Cylinder Head Valves
G3516 Engines Gear Group (Front)
C7.1 Marine Generator Set High Pressure Fuel Lines
C7.1 Industrial Engine Exhaust Back Pressure Valve - Remove and Install
C7.1 Marine Generator Set Model View Illustrations
C13 Tier 4 Final Engines Gear Group (Front) - Time
C32 Marine Generator Set Engine Air Cleaner Element (Single Element) - Inspect/Replace
2012/09/07 Serviceability of Connecting Rod Bearings in Type 2 C175 Engines {1219}
C7.1 Marine Generator Set Product Description
C7.1 Marine Generator Set Plate Locations and Film Locations
C13 Tier 4 Final Engines Air Inlet and Exhaust System - Inspect
C7.1 Marine Generator Set Product Lifting