Auxiliary Water Pump
Show/hide table
| |
| Illustration 1 | g02996037 |
Show/hide table
| Specification for 315-5137 Auxiliary Sea Water Pump Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 8N-8464 Housing As | Bore of the 8M-9321 Bushing after assembly is |
| During assembly, flush the bushing surface to |
|||
| 2 | 1 | 7J-0204 O-Ring Seal | Lightly, lubricate the bore with engine oil, glycerine, or clean water. |
| 3 | 1 | 9M-3786 O-Ring Seal | Lightly, lubricate the bore with engine oil, glycerine, or clean water. |
| 4 | 1 | 3F-1358 Drain Plug | Torque to |
| 5 | 1 | 8T-6764 Pipe Plug | Torque to |
| 6 | 1 | 7N-4758 Thrust Washer | Thickness is |
| 7 | 1 | 3H-5844 Bolt | Torque to |
| Before assembly, lubricate the face and the threads of the washer with 4C-5592 Anti-Seize Compound. | |||
| No anti-seize is allowed on the face of the impeller . | |||
| 8 | 1 | 8C-5236 Lip Type Seal | Do not lubricate the sealing lip. |
| 9 | 1 | 315-5136 Shaft As | Diameter of the shaft for impeller is |
| Width in the groove of the shaft for the thrust washer is |
|||
| 10 | 1 | 262-4378 Water Pump Seal As | Use the following procedure to install the seal group.
1. During assembly use clean water or P80 lubricant.. 2. Use Installation tool and hand presure for assembly. 3. Seat the ceramic ring and the rubber seal into the housing with the polished face of the ring toward the carbon seal group.. 4. Remove the spring from the seal assembly . 5. Use Installation tool and hand presure to press the seal assembly on the shaft until the faces of the seal makes the contact lightly. 6. Install the spring. |
Caterpillar Information System:
2014/07/11 An Improved Front Crankshaft Seal Is Used on G3300 Engines {1160, 1161}
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Reference Material
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Torque Converter and Transmission Oil Sample - Obtain
2012/04/17 A New Holder for the Flywheel Timing Pin is Used On C175-16 Petroleum Engines {1157}
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Torque Converter and Transmission Oil Level - Check
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Torque Converter and Transmission Oil - Change
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Oil Filter (Torque Converter, Transmission) - Replace
3512C and 3516C Marine Engines Auxiliary Drive Shaft
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Magnetic Screen (Transmission) - Clean
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Breather (Transmission) - Clean
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Capacities (Refill)
320E and 323E Excavators Machine System Specifications Pilot Lines
C4.4 Marine Generator Set Turbocharger - Inspect
C4.4 Marine Generator Set Engine Air Cleaner Element (Single Element) - Inspect/Replace
C3.4B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C4.4 Marine Generator Set Product Storage
3116 and 3126 Marine Engines Maintenance Interval Schedule
G3516 Power Module Refill Capacities
2012/04/24 Programming Digital Output 1 of EMCP 4.2 on Certain Cat Products {4490}
G3516 Power Module Coolant Temperature Regulator - Replace
3512C and 3516C Marine Auxiliary Engines Coolant Pressure Is Low
G3516 Power Module Belts - Inspect/Adjust/Replace
G3600 A4 Engines Prelubrication Pump Problem