Air Cleaner
- Release clamps (1). Remove covers (2) from air cleaner housing (4). Disconnect harness assemblies (3). Repeat the process on the other air cleaner housing (4).
Show/hide table
Illustration 2 g02110529 - Remove air cleaner elements (6). Loosen clamps (5).
Show/hide table
Illustration 3 g02365325 - Remove bolts (7), the washers, and the nuts on each side of air cleaner housing (4). Remove air cleaner housing (4).
Show/hide table
Illustration 1 | g02365096 |
- Install air cleaner housing (4) in the reverse order of removal.
Caterpillar Information System:
C175-16 Marine Engine Electronic Unit Injector Sleeve
C175-16 Marine Engine Electronic Unit Injector
C175-16 Marine Engines Marine Classification Society Certification Requirements
C175-16 Marine Engine Fuel Pump (High Pressure)
C175-16 Marine Engine Flow Limiter
C175-16 Marine Engines Gauges and Indicators
C175-16 Marine Engine High Pressure Fuel Rails
C175-16 Marine Engine Fuel Transfer Pump
C175-16 Marine Engine Prelubrication Oil Pump
3500 Engines Turbocharger
C175-16 Marine Engine Fuel Filter Housing
C15 and C18 Engines for Caterpillar Built Machines Air Cleaner
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Troubleshooting
3508C, 3512C and 3516C Locomotive Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
PL61 Pipelayer Machine Systems Flood Lamp
C13, C15, and C18 Tier 4 Final Engines Coolant Level Sensor
C175-16 Locomotive Engine Pressure Sensor
C175-16 Marine Engine Air Shutoff
C175-16 Marine Engine Exhaust Manifold
C175-16 Marine Engine Exhaust Elbow
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Telemetry Parameters
C175-16 Marine Engine Air Inlet Manifold
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Status Messages
C175-16 Marine Engine Inlet and Exhaust Valve Springs