An Improved Coupler is Used on Certain Petroleum Transmissions {3252}
- Petroleum Transmission:
- TH48-E80 (S/N: FRT1-UP)
- TH55FT-E70 (S/N: PCJ1-UP)
Description of Change: A new coupling assembly is used on certain TH48-E80 and TH55FT-E70 Petroleum Transmissions.The new coupling is used on 2250 hp TH48-E80 and 2500 hp TH55-E70 applications. The new 371-8459 Coupling As is designed to better handle reverse torque loads caused by instability.
Adaptable To: The 284-9291 Coupling As has been canceled and replaced by the new 371-8459 Coupling As in all applications.
Note: The 343-8968 Transmission Ar and 351-3169 Transmission Ar for the TH55-E70 Petroleum Transmission are for 3000 hp applications. These transmission arrangements will continue to use the 357-6672 Coupling As.
Show/hide table
Required Part     | ||
---|---|---|
Former Part Number     |
Description     | New Part Number     |
284-9291     | Coupling As     | 371-8459     |
- TH48-E80 (S/N: FRT972)
- TH55FT-E70 (S/N: PCJ1103)
- TH48-E80 (S/N: FRT1-971)
- TH55FT-E70 (S/N: PCJ1-1102)
Caterpillar Information System:
2011/11/14 Hydraulic Control Modifications for TH48-E80 Petroleum Transmission and SPF343C Pumper Transmission {3074, 3083, 3167}
3500 Generator Sets Refill Capacities
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Connector Contact Description
2011/10/31 An Improved Inlet Manifold Pressure Sensor Is Used with Certain G3516C and G3520C Generator Set Engines {1408, 1439, 1917}
2011/10/31 Improved Bolts Are Used for the High-Pressure Fuel Pump Relief Valve on C175-16 Engines {1251, 7553}
C13 Engine for Combat and Tactical Vehicles Cylinder Head Valves
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218} Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
2011/10/31 A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3516B Engines {1261}
C13 Engine for Combat and Tactical Vehicles Fuel Transfer Pump
G3500 Engines Actuator Linkage - Air/Fuel Ratio Control
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
316E Excavator Machine System Specifications Window Wiper and Washer - Lower
3516C Generator Set Engines Data Link - Test
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions - Configure
3500C Marine Engines Monitoring System - Diagnostic Codes and Event Codes
336E Excavator Machine System Specifications Relief Valve (Line)
A New Control for Monitoring Combustion and Exhaust Temperatures Is Used for Certain G3600 Engines {1917, 1924} A New Control for Monitoring Combustion and Exhaust Temperatures Is Used for Certain G3600 Engines {1917, 1924}
C18 Generator Sets Mounting and Dismounting
3500B Generator Sets Engine Crankcase Breather - Clean/Replace
3516C Generator Set Engines Electronic Service Tool Does Not Communicate
312F and 313F Excavator Machine System Specifications Refrigerant Compressor Mounting
Failure of the Bulkhead Ignition Harness Connector on Certain G3508B Engines{1408, 4460, 7426} Failure of the Bulkhead Ignition Harness Connector on Certain G3508B Engines{1408, 4460, 7426}
C32 Auxiliary Engine Control Panel - Cat Marine Engine Control Panel III (MECP III )(If Equipped)
C32 Marine Engine Fluid Recommendations