Flood Lamps
Show/hide table
|
|
|
| Illustration 1 | g01913135 |
Flood lamps are mounted to the brackets for the camera on the left and right side of the machine. The flood lamp is used in order to provide illumination for the cameras that are mounted to the sides of the machine.
Show/hide table
Table 1
| Pin |
Input |
| 1 |
24 V |
| 2 |
Ground |
Power Converter
Show/hide table
|
|
|
| Illustration 2 | g01913137 |
Show/hide table
|
|
|
| Illustration 3 | g02093813 |
Show/hide table
Table 2
| Pin |
Input |
| Connector 1 |
| 2 |
Keyswitch |
| 4 |
+ 12V Memory Out |
| Connector 2 |
| 1 |
+ 24V Input |
| 2 |
Ground |
| 3 |
+ 12V Output |
The power converter is designed in order to provide the 12 VDC that is required to operate the object detection sensors. The converter converts 24 VDC to 12 VDC. The electrical system of the machine provides battery voltage to the converter via the circuit breaker and the main power relay for the system. The output circuit of the converter connects to the radar sensors. The power converter is located behind the cab. There is not a connection between the converter and the display. The display does not detect any failures in the circuits of the power converter. Although the radar sensors will report power issues with internal diagnostics of the sensors.
