Carburetor - Remove and Install
拆卸步骤
开始:
- 拆下旋转执行器（汽化器）。
- 拆下螺栓 (1) ，然后拆下管组件 (3) 。
注: 必要时，拆下油门 (2) 。
Show/hide table
 | |
| 图 1 | g02735839 |
- 拆下软管组件 (4) 。
Show/hide table
 | |
| 图 2 | g02645660 |
- 拆下盖 (5) ，然后拆下空气滤清器芯。
Show/hide table
 | |
| 图 3 | g02645666 |
- 拆下螺栓 (6) 和导管。 拆下夹子 (8) ，然后拆下软管 (9) 。
Show/hide table
 | |
| 图 4 | g02645699 |
Show/hide table
 | |
| 图 5 | g02645714 |
- 拆下螺栓 (7) ，然后拆下适配器 (10) 和汽化器 (11) 。
- 拆下螺栓 (12) 。 将汽化器 (11) 从适配器 (10) 上分离。 检查汽化器和适配器之间的密封垫状况。 如果密封垫磨损或损坏，则用新件更换。
Show/hide table
 | |
| 图 6 | g00784077 |
- 将指示器 (13) 从适配器 (10) 上拆下。
Show/hide table
 | |
| 图 7 | g00784084 |
安装步骤
- 按与拆卸相反的顺序安装汽化器 (11) 。
- 拧紧螺栓 (3) 至扭矩为 60 ± 12 N·m (44 ± 9 lb ft)。
- 安装后，调整汽化器 (11) 。 请参阅测试和调整, SENR6538, "汽化器 - 调整"。
Caterpillar Information System:
CG137-08 and CG137-12 Engines Rotary Actuator (Gas Pressure Regulator) - Remove and Install
CG137-08 and CG137-12 Engines Rotary Actuator (Carburetor) - Remove and Install - G3412B
3500C Marine Engines Vibration Damper Guard
3512B and 3512C Petroleum Generator Set Engines Flywheel Housing Cover
3516C Generator Set Engines Flywheel Housing
G3512 Gas Engine Flywheel
3516C Generator Set Engines Gear Group (Rear)
345B Series II Excavator Machine System Specifications Bucket Cylinder
3500B Engines Engine Mount
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 and C13 Engines with 500 HP Field Up-Rates and 525 HP RV Ratings with Optional (Shallow) Oil Sumps
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 and C13 Engines with 500 HP Field Up-Rates and 525 HP RV Ratings with Standard (Deep) Oil Sumps
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 and C13 Engines with Optional Shallow Oil Sumps
CG137-08 and CG137-12 Engines Transformer - Remove and Install
CG137-08 and CG137-12 Engines Spark Plugs - Remove and Install
CG137-08 and CG137-12 Industrial Engines Aftercooler
CG137-08 and CG137-12 Engines Spark Plug Adapter - Remove and Install
CG137-08 and CG137-12 Industrial Engines Aftercooler - Test
2011/07/14 A New Oil Suction Screen Is Used in C175-16 Generator Set Engines {1302}
C3.4B Industrial Engine Starting the Engine
330C Forest Machine Machine System Specifications Track
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor and Lines (NRS)
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
C3.4B Industrial Engine Emissions Certification Film
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators General Hazard Information