A New Kit Is Available for Servicing High-Pressure Fuel Pumps on C175-16 Engines {1251, 1290}
- Generator Set:
- C175-16 (S/N: WYB1-UP)
- Engine:
- C175-16 (S/N: P6L1-UP)
The 382-5051 Pump Kit includes all required parts for capping and plugging the fuel system during removal of a high-pressure fuel pump. The parts in the kit help to minimize contamination of the fuel system.
Table 1 is a list of the parts in the kit. The parts can also be ordered separately.
Show/hide table
382-5051 Pump Kit     | |
Qty     | Part     |
1     | 330-3344 Film     |
1     | 9U-7137 Plug     |
1     | 276-0731 Plug Cap     |
1     | 276-0746 Plug Cap     |
1     | 276-0753 Plug Cap     |
4     | 7E-8716 Tapered Cap/Plug     |
1     | 9U-7073 Tapered Cap/Plug     |
3     | 9U-7077 Tapered Cap/Plug     |
3     | 9U-7080 Tapered Cap/Plug     |
1     | 9U-7081 Tapered Cap/Plug     |
4     | 9U-7082 Tapered Cap/Plug     |
1     | 9U-7084 Tapered Cap/Plug     |
6     | 9U-7085 Tapered Cap/Plug     |
5     | 9U-7087 Tapered Cap/Plug     |
1     | 144-7339 O-Ring Seal     |
1     | 207-2755 O-Ring Seal     |
2     | 228-7090 O-Ring Seal     |
2     | 228-7091 O-Ring Seal     |
3     | 228-7093 O-Ring Seal     |
2     | 228-7100 O-Ring Seal     |
1     | 228-7102 O-Ring Seal     |
1     | 330-3517 O-Ring Seal     |
1     | 3P-1156 O-Ring Seal     |
2     | 5P-9186 O-Ring Seal     |
1     | 6V-9746 O-Ring Seal     |
Caterpillar Information System:
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Piston and Rings - One-Piece Piston
C15 and C18 Engines for Caterpillar Built Machines Water Pump
C13, C15, and C18 Tier 4 Final Engines Water Pump
C11, C13, and C15 On-highway Engines Grounding Stud - Inspect/Clean/Tighten
3116 and 3126 Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 639 - FMI 9
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 639 - FMI 14
C-12 Engine Fluid Recommendations
C11, C13, and C15 On-highway Engines Refill Capacities
C11, C13, and C15 On-highway Engines Reference Information
Installation of the 330-3344 Film for the High-Pressure Fuel Pump on C175 Engines{1251, 1290, 7405, 7557} Installation of the 330-3344 Film for the High-Pressure Fuel Pump on C175 Engines{1251, 1290, 7405, 7557}
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
C11, C13, and C15 On-highway Engines Belt Tensioner - Check
2011/11/21 New Seawater Pumps Are Used for C280 and 3600 Marine Engines {1371}
C13 and C15 On-Highway Engines Valve Actuators - Check
Cat® Digital Voltage Regulator Group Support Level
2011/07/11 New Seals Are Used on the Power Distribution Boxes of Certain Petroleum Generator Sets {7426, 7555}
2012/06/08 A New Cylinder Head Gasket and Spacer Plate Are Used for Certain 3500 Locomotive Engines {1100, 1201, 7555}
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Magnetic Screen (Transmission)
PM820, PM822, and PM825 Cold Planer Fuel Tank Cap Filter - Replace
C11, C13, and C15 On-highway Engines Engine Oil Level - Check
CG137-08 and CG137-12 Industrial Engines Throttle Actuator - Test
CG137-08 and CG137-12 Engines Engine Support - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan