Accessory Drive (Lower Left Hand)
Show/hide table
Illustration 1 | g02592836 |
(2) 7N-5279 Adapter As
(5) 2W-7320 Accessory Drive Gear (7) 116-3242 Idler Gear As |
Show/hide table
Specification for 8N-5678 Accessory Drive Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 7N-7539 Thrust Washer | Thickness of one new thrust washer is |
3 | 3 | - | Before assembly, lightly lubricate the bore for the O-ring seals with the fluid that is being sealed. |
4 | 1 | 7N-5874 Auxiliary Drive Shaft | Diameter is |
Width of groove for thrust washer is |
|||
6 | 1 | 127-5400 Bushing | After assembly, bore is |
8 | 1 | 116-1365 Bearing | After assembly, bore is |
Installation depth is |
|||
9 | 1 | 7C-3259 Shaft | Diameter is |
Caterpillar Information System:
C32 Marine Engines Cylinder Head
C175-16 Engine for Off-Highway Truck/Tractors Engine Oil Pump
G3500 Engines Vibration Damper
3500 Engines Stub Shaft (Front)
C27 and C32 Tier 4 Final Marine Engines Cylinder Head
C175-16 Petroleum Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
3500B and 3500C Marine Engines Vibration Damper Guard
797F and 797F XQ Off-Highway Trucks Machine Systems Upper and Lower Link (Suspension) - Install
797F and 797F XQ Off-Highway Trucks Machine Systems Upper and Lower Link (Suspension) - Remove
Cat Water Delivery System (WDS) Service Ports
3516C IMO III Petroleum Engines Engine Oil Cooler - Install
C32 Marine Engines Engine Oil Filter Base
C32 Marine and Auxiliary Marine Engines Exhaust Manifold
C32 Marine and Auxiliary Marine Engines Exhaust Manifold
C32 Marine Engines Engine Oil Filter Base
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451} Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
349F and 352F Excavators Machine System Specifications Cab - Front Window Guard
2011/07/11 A Different Vibration Damper Guard Is Available for Certain 3512C Petroleum Engines {1205}
320D and 323D Excavators Machine System Specifications Pressure Reducing Valve (Boom and Stick Priority)
2012/06/06 A New Elbow and Clamps Are Used for the Oil Cooler Bypass Tube on Certain 3500 Engines {1307, 1307}
2011/07/28 A New Aftercooler Bracket and an Insulating Plate Are Used on C175-16 Generator Set Engines {1063}
2011/06/06 New Routing of the Battery Disconnect Cable on C175-16 Generator Set Engines {1411}
TA19 Agriculture Transmission Electronic Control System Connector Locations