3500 Engines Caterpillar


Stub Shaft (Front)

Usage:

3508C C8E


图 1g02592036
低 kW (HP) 附件
(1)曲轴

表 1
技术规格 - 334-0956 枢轴总成 
项目  数量  零件  技术规格说明 
9F-8122 螺栓  拧紧至扭矩为 1150 ± 150 N·m (848 ± 111 lb ft)。 
将枢轴上的对准标记与适配器 (2) 上的对准标记对齐。 

Caterpillar Information System:

C27 and C32 Tier 4 Final Marine Engines Cylinder Head
C175-16 Petroleum Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
3500B and 3500C Marine Engines Vibration Damper Guard
797F and 797F XQ Off-Highway Trucks Machine Systems Upper and Lower Link (Suspension) - Install
797F and 797F XQ Off-Highway Trucks Machine Systems Upper and Lower Link (Suspension) - Remove
Cat Water Delivery System (WDS) Service Ports
3516C IMO III Petroleum Engines Engine Oil Cooler - Install
CG137-08 and CG137-12 Engines Carburetor Air/Fuel Ratio - Check/Adjust
C3.4B Industrial Engine Diesel Particulate Filter - Clean
C27 and C32 Generator Set Engines Cylinder Head Valves
3500B Engines for Caterpillar Built Power Modules Vibration Damper Guard
G3500 Engines Vibration Damper
C175-16 Engine for Off-Highway Truck/Tractors Engine Oil Pump
C32 Marine Engines Cylinder Head
3500 Engines for Caterpillar Built Generator Sets Accessory Drive (Lower Left Hand)
C32 Marine Engines Engine Oil Filter Base
C32 Marine and Auxiliary Marine Engines Exhaust Manifold
C32 Marine and Auxiliary Marine Engines Exhaust Manifold
C32 Marine Engines Engine Oil Filter Base
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451} Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
349F and 352F Excavators Machine System Specifications Cab - Front Window Guard
2011/07/11 A Different Vibration Damper Guard Is Available for Certain 3512C Petroleum Engines {1205}
320D and 323D Excavators Machine System Specifications Pressure Reducing Valve (Boom and Stick Priority)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.