Service Ports
Show/hide table
| |
| Illustration 1 | g03176805 |
|
The service port is on the mounting bracket for the display. | |
(1) Service Port - This service port is used to program the display module.
Note: The COM Adapter port on the display bracket or the machine COM Adapter port can be used as a service port for WDS Display. (Earlier models of WDS may have USB port as service port if they are not updated with the latest harness. Consult your Cat Dealer for recommended USB cable if needed.)
Caterpillar Information System:
3516C IMO III Petroleum Engines Engine Oil Cooler - Install
CG137-08 and CG137-12 Engines Carburetor Air/Fuel Ratio - Check/Adjust
C3.4B Industrial Engine Diesel Particulate Filter - Clean
C27 and C32 Generator Set Engines Cylinder Head Valves
3500B Engines for Caterpillar Built Power Modules Vibration Damper Guard
3500 Engines Flywheel Housing Cover
C32 Marine Engines Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines Camshaft
3412 Generator Set Engines Water Pump
Cat Water Delivery System (WDS) Capacities (Refill)
Cat Water Delivery System (WDS) Lubricant Viscosities - Fluids Recommendations
Cat Water Delivery System (WDS) Hydraulic System Oil Sample - Obtain
797F and 797F XQ Off-Highway Trucks Machine Systems Upper and Lower Link (Suspension) - Remove
797F and 797F XQ Off-Highway Trucks Machine Systems Upper and Lower Link (Suspension) - Install
3500B and 3500C Marine Engines Vibration Damper Guard
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C175-16 Petroleum Engines Engine Oil Pan
C27 and C32 Tier 4 Final Marine Engines Cylinder Head
3500 Engines Stub Shaft (Front)
G3500 Engines Vibration Damper
C175-16 Engine for Off-Highway Truck/Tractors Engine Oil Pump
C32 Marine Engines Cylinder Head
3500 Engines for Caterpillar Built Generator Sets Accessory Drive (Lower Left Hand)
C32 Marine Engines Engine Oil Filter Base