G3500 Engines Caterpillar


Vibration Damper

Usage:

G3508 2TJ


图 1g02592557


图 2g02592558

表 1
技术规格 - 162-7460 减振器总成 
项目  数量  零件  技术规格说明 
曲轴 (1) 上的对准标记必须与两个适配器 (2) 上的对准标记对准。 两个减振器总成 (3) 上的对准标记必须与两个适配器 (2) 上的对准标记对准。 
8S-4757 螺栓  拧紧至扭矩为 1150 ± 60 N·m (848 ± 44 lb ft)。 
组装之前,先用二硫化钼基础润滑剂对螺栓的螺纹进行润滑。
48  1A-2029 螺栓  拧紧至扭矩为 55 ± 7 N·m (41 ± 5 lb ft)。 
使用蓝色 Loctite 242 润滑螺栓的螺纹。

Caterpillar Information System:

3500 Engines Stub Shaft (Front)
C27 and C32 Tier 4 Final Marine Engines Cylinder Head
C175-16 Petroleum Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
3500B and 3500C Marine Engines Vibration Damper Guard
797F and 797F XQ Off-Highway Trucks Machine Systems Upper and Lower Link (Suspension) - Install
797F and 797F XQ Off-Highway Trucks Machine Systems Upper and Lower Link (Suspension) - Remove
Cat Water Delivery System (WDS) Service Ports
3516C IMO III Petroleum Engines Engine Oil Cooler - Install
CG137-08 and CG137-12 Engines Carburetor Air/Fuel Ratio - Check/Adjust
C3.4B Industrial Engine Diesel Particulate Filter - Clean
C27 and C32 Generator Set Engines Cylinder Head Valves
C175-16 Engine for Off-Highway Truck/Tractors Engine Oil Pump
C32 Marine Engines Cylinder Head
3500 Engines for Caterpillar Built Generator Sets Accessory Drive (Lower Left Hand)
C32 Marine Engines Engine Oil Filter Base
C32 Marine and Auxiliary Marine Engines Exhaust Manifold
C32 Marine and Auxiliary Marine Engines Exhaust Manifold
C32 Marine Engines Engine Oil Filter Base
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451} Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
349F and 352F Excavators Machine System Specifications Cab - Front Window Guard
2011/07/11 A Different Vibration Damper Guard Is Available for Certain 3512C Petroleum Engines {1205}
320D and 323D Excavators Machine System Specifications Pressure Reducing Valve (Boom and Stick Priority)
2012/06/06 A New Elbow and Clamps Are Used for the Oil Cooler Bypass Tube on Certain 3500 Engines {1307, 1307}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.