Engine Speed/Timing Sensor - Clean/Inspect
Show/hide table
Ilustrace 1 | g01162639 |
(1) Sekundární snímač otáček a časování
(2) Primární snímač otáček a časování |
- Vyjměte snímače otáček/časování z předního krytu. Zkontrolujte, zda není plastová část snímačů otáček/časování opotřebená nebo znečištěná.
- Odstraňte z přední části snímačů otáček/časování kovové částice a jiné nečistoty.
- Při instalaci snímačů otáček/časování použijte následující postup.
- Namažte těsnění snímačů otáček čistým motorovým olejem.
- Před utahováním šroubů se ujistěte, že jsou snímače otáček správně usazeny.
- Namontujte snímače otáček/časování. Utahovací moment šroubu je
28 ± 7 Nm (21 ± 5 lb ft) .
Je-li to třeba, viz Průvodce řešením potíží, "Snímač otáček/časování motoru – Kalibrace", kde je uveden postup kalibrace snímačů otáček/časování.
Caterpillar Information System:
C32 Petroleum Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C27 and C32 Industrial Engines Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
C27 and C32 Industrial Engines Coolant Temperature Regulator - Replace
G3406 Engine Fluid Recommendations
G3304B and G3306B Engines Refill Capacities
UPSB505 Uninterruptible Power Supply External Battery Cabinet Connection
3500 Generator Sets Coolant Sample (Level 2) - Obtain
C32 Petroleum Engines Coolant Sample (Level 1) - Obtain
C27 and C32 Industrial Engines Coolant Level - Check
C32 Petroleum Engines Coolant Extender (ELC) - Add
C27 and C32 Industrial Engines Coolant (ELC) - Change
C27 and C32 Industrial Engines Coolant (DEAC) - Change
C32 Petroleum Engines Fuel Injector - Inspect/Adjust
C32 Petroleum Engines Power Take-Off Clutch - Check
C32 Petroleum Engines Engine Valve Lash - Check
C15 Petroleum Engines Emergency Stopping
2011/03/22 The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on Certain Engines {1260, 1261, 1262, 1263}
UPSB505 Uninterruptible Power Supply Dry Contact Settings
C15 and C18 Petroleum Generator Sets Maintenance Interval Schedule - Prime Power
C15 and C18 Petroleum Generator Sets Maintenance Interval Schedule - Standby
Catalyst Installation General Requirements for CG137-12 and G3300B Engines{1091} Catalyst Installation General Requirements for CG137-12 and G3300B Engines{1091}
G3304B and G3306B Engines Emergency Stopping
UPSB505 Uninterruptible Power Supply Display Settings
G3304B and G3306B Engines Engine Operation