C32 Petroleum Engines Caterpillar


Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace

Usage:

C32 B2C
Proveďte postup uvedený v příručce pro provoz a údržbu, "Servisní indikátor čističe vzduchu motoru – prohlídka" a postup uvedený v příručce pro provoz a údržbu, "Předčistič vzduchu – čištění" (je-li ve výbavě) a teprve poté postupujte podle následujících kroků.


OZNÁMENÍ

Neuvádějte nikdy motor do chodu, dokud není nainstalovaná filtrační vložka vzduchového filtru. Neuvádějte nikdy motor do chodu s poškozenou filtrační vložkou vzduchového filtru. Nepoužívejte filtrační vložky s poškozenými záhyby, plochými těsněními nebo dosedacími plochami. Nečistoty vniklé do motoru způsobí předčasné opotřebení nebo poškození komponentů motoru. Filtrační vložky vzduchového filtru zabraňují vniknutí nečistot ze vzduchu do systému sání motoru.



OZNÁMENÍ

Nikdy neprovádějte údržbu vzduchového filtru nebo výměnu filtrační vložky během chodu motoru, aby nedošlo ke vniknutí nečistot do motoru.




Ilustrace 1g00310663


Ilustrace 2g00310664

  1. Sejměte kryt čističe vzduchu (1) a vyjměte vložku (2).

  2. Utěsněte přívod vzduchu k turbodmychadlu (3), aby do něj nemohly vniknout nečistoty. K zakrytí otvoru můžete použít pásku nebo čistou tkaninu.

  3. Vyčistěte vnitřní část krytu čističe vzduchu. Vyčistěte těleso, které drží vložku čističe vzduchu.

  4. Prohlédněte náhradní vložku a ověřte, že nevykazuje následující stopy:poškození, znečištění a usazeniny.

  5. Odstraňte těsnění z otvoru přívodu turbodmychadla.

  6. Namontujte čistou vložku v dobrém stavu.

  7. Nasaďte kryt čističe vzduchu (1).

  8. Resetujte servisní indikátor.

Caterpillar Information System:

C27 and C32 Industrial Engines Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
C27 and C32 Industrial Engines Coolant Temperature Regulator - Replace
G3406 Engine Fluid Recommendations
G3304B and G3306B Engines Refill Capacities
UPSB505 Uninterruptible Power Supply External Battery Cabinet Connection
3500 Generator Sets Coolant Sample (Level 2) - Obtain
C32 Petroleum Engines Coolant Sample (Level 1) - Obtain
C27 and C32 Industrial Engines Coolant Level - Check
C32 Petroleum Engines Coolant Extender (ELC) - Add
C27 and C32 Industrial Engines Coolant (ELC) - Change
C27 and C32 Industrial Engines Coolant (DEAC) - Change
C32 Petroleum Engines Fluid Recommendations
C27 and C32 Industrial Engines Engine Speed/Timing Sensor - Clean/Inspect
C32 Petroleum Engines Fuel Injector - Inspect/Adjust
C32 Petroleum Engines Power Take-Off Clutch - Check
C32 Petroleum Engines Engine Valve Lash - Check
C15 Petroleum Engines Emergency Stopping
2011/03/22 The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on Certain Engines {1260, 1261, 1262, 1263}
UPSB505 Uninterruptible Power Supply Dry Contact Settings
C15 and C18 Petroleum Generator Sets Maintenance Interval Schedule - Prime Power
C15 and C18 Petroleum Generator Sets Maintenance Interval Schedule - Standby
Catalyst Installation General Requirements for CG137-12 and G3300B Engines{1091} Catalyst Installation General Requirements for CG137-12 and G3300B Engines{1091}
G3304B and G3306B Engines Emergency Stopping
UPSB505 Uninterruptible Power Supply Display Settings
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.