Throttle Control Valve - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 必要时，在油门控制阀 (3) 和油门控制阀执行器 (7) 之间安装 O 形密封圈。 安装螺栓 (6) ，将油门控制阀 (3) 与油门控制阀执行器 (7) 连接。
Show/hide table
 | |
| 图 1 | g02452649 |
- 定位垫片和油门控制阀 (3) 。 将螺栓 (2) 和螺栓 (4) 安装到空燃混合器 (1) 和适配器 (5) 中。
- 将线束组件连接到油门控制阀执行器 (7) 。
- 打开通向气体压力调节器的供油管路。
Caterpillar Information System:
G3304B and G3306B Engines Throttle Control Valve - Remove
C15 Petroleum Engines Engine Oil Level - Check
UPSB505 Uninterruptible Power Supply Frequency Converter Connection
G3304B and G3306B Engines Fuel Control Actuator - Remove and Install
C4.4 Industrial Engine Electronic Control Module
C4.4 Industrial Engine Atmospheric Pressure Sensor
C15 Petroleum Engines Belt Tensioner - Check
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys User Interface for Multiple Module Unit
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys User Interface for System Cabinet
C15 Petroleum Engines Refill Capacities
C15 Petroleum Engines Product Description
UPSB505 Uninterruptible Power Supply Single UPS Connection
C11 and C13 Industrial Engines Engine Oil Level - Check
G3304B and G3306B Engines Carburetor - Disassemble
UPSB505 Uninterruptible Power Supply Parallel UPS Connection
G3304B and G3306B Engines Carburetor - Assemble
312F and 313F Excavators Sound Information and Vibration Information
UPSB505 Uninterruptible Power Supply Static Switch Connection
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Battery - Replace
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Air Filter Element - Clean/Replace
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Flywheel - Clean
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Sight Gauge - Clean
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Oil Level - Check
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Model View Illustrations