C9 On-highway Engines Caterpillar


Grounding Stud - Inspect/Clean/Tighten

Usage:

C9 9DG


Illustration 1g00930426
The air inlet heater is typically grounded to the cylinder head grounding stud.
(1) Cylinder head grounding stud

Inspect the OEM harness for good connections and condition.

The cylinder head grounding stud must have a wire ground to the battery. Tighten the cylinder head grounding stud at every oil change. Ground wires and straps should be combined at engine grounds. All grounds should be tight and free of corrosion.

  • Clean the cylinder head grounding stud and the terminals for the cylinder head ground strap with a clean cloth.

  • If the connections are corroded, clean the connections with a solution of baking soda and water.

  • Keep the cylinder head grounding stud and the strap clean and coated with MPGM grease or petroleum jelly.

Caterpillar Information System:

C18 Industrial Engines Grounding Stud - Inspect/Clean/Tighten
UPSB220 Uninterruptible Power Supply Fire Prevention and Explosion Prevention
C13 Engines Engine Speed/Timing Sensor - Clean/Inspect
C15 and C18 Petroleum Generator Sets Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
C27 and C32 Industrial Engines and C32 Petroleum Engine Plate Locations and Film Locations
C3.4B Engines for Caterpillar Built Machines Gear Group - Inspect
C3.4B Engines for Caterpillar Built Machines Fuel Injection
C3.4B Engines for Caterpillar Built Machines Connecting Rod - Inspect
UPSB220 Uninterruptible Power Supply Display Settings
2010/12/20 Use the Correct Software for C280 Marine Auxiliary Engines Used in Land-Based Applications {7610, 7620}
UPSB220 Uninterruptible Power Supply UPS Characteristics
UPSB220 Uninterruptible Power Supply Return to Normal Operation
UPSB220 Uninterruptible Power Supply Computer Network
Receiving and Unpacking of UPSB220{4480} Receiving and Unpacking of UPSB220{4480}
C3.4B Engines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive
G3500 A3 Engines Engine Speed Switch
Carrier Roller Oil Fill Volume {4154} Carrier Roller Oil Fill Volume {4154}
C9 On-highway Engines Fluid Recommendations
Welding Wire and Flux {0679, 4150, 7950} Welding Wire and Flux {0679, 4150, 7950}
C9 On-highway Engines Severe Service Application
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning E45 - Air Inlet Damper Error
320 VH and VM Variable Gauge Undercarriage Travel Motor - Disassemble
2011/01/06 A New Valve Bridge Is Available for Certain Commercial Engines {1121}
2011/01/20 A New Valve Bridge Is Available for Certain Machines {1121}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.