Engine Speed/Timing Sensor - Clean/Inspect
Show/hide table
| |
| Illustration 1 | g01068233 |
|
(1) Harness assembly
(2) Sensor (3) Bolt | |
- Disconnect the harness assembly.
- Remove the bolt and the sensor.
- Remove the O-ring seal from the sensor.
Procedure for Cleaning and Inspecting
Check the condition of the plastic end of the sensor for wear and for contaminants. Clean the metal shavings and other debris from the face of the sensor.
- Install a new O-ring seal on the sensor. Lubricate the O-ring seal with clean engine oil.
- Position the sensor in the housing and install the bolt.
- Connect the harness assembly.
Crankshaft Speed/Timing Sensor
Show/hide table
| |
| Illustration 2 | g01895213 |
|
(4) Sensor
(5) Harness Assembly (6) Bolt | |
- Disconnect the harness assembly.
- Remove the bolt and the sensor.
- Remove the O-ring seal from the sensor.
Procedure for Cleaning and Inspecting
Check the condition of the plastic end of the sensor for wear and for contaminants. Clean the metal shavings and other debris from the face of the sensor.
- Install a new O-ring seal on the sensor. Lubricate the O-ring seal with clean engine oil.
- Install the position sensor in the front housing and install the bolt.
- Connect the harness assembly.
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
C27 and C32 Industrial Engines and C32 Petroleum Engine Plate Locations and Film Locations
C3.4B Engines for Caterpillar Built Machines Gear Group - Inspect
C3.4B Engines for Caterpillar Built Machines Fuel Injection
C3.4B Engines for Caterpillar Built Machines Connecting Rod - Inspect
UPSB220 Uninterruptible Power Supply Display Settings
2010/12/20 Use the Correct Software for C280 Marine Auxiliary Engines Used in Land-Based Applications {7610, 7620}
UPSB220 Uninterruptible Power Supply UPS Characteristics
UPSB220 Uninterruptible Power Supply Return to Normal Operation
UPSB220 Uninterruptible Power Supply Functional System Check
C7 Engines for Combat and Tactical Vehicles Belt Tensioner - Check
2011/01/24 A New Hose for the Air Lines Group Is Used on Certain C18 Marine Engines {1071}
UPSB220 Uninterruptible Power Supply Fire Prevention and Explosion Prevention
C18 Industrial Engines Grounding Stud - Inspect/Clean/Tighten
C9 On-highway Engines Grounding Stud - Inspect/Clean/Tighten
UPSB220 Uninterruptible Power Supply Computer Network
Receiving and Unpacking of UPSB220{4480} Receiving and Unpacking of UPSB220{4480}
C3.4B Engines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive
G3500 A3 Engines Engine Speed Switch
Carrier Roller Oil Fill Volume {4154} Carrier Roller Oil Fill Volume {4154}
C9 On-highway Engines Fluid Recommendations
Welding Wire and Flux {0679, 4150, 7950} Welding Wire and Flux {0679, 4150, 7950}
C9 On-highway Engines Severe Service Application
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning E45 - Air Inlet Damper Error