C27 and C32 Generator Set Engines Caterpillar


Electric Starting Motor

Usage:

C27 2A3


图 1g06141681

表 1
技术规格,用于 338-3454 电动起动马达总成和 352-9766 电动马达总成 
项目  数量  零件  技术规格说明 
6V-8188 螺母  拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 
4B-2049 螺母 4B-2049 螺母  拧紧至扭矩为 3.4 ± 1.2 N·m (30.1 ± 10.6 lb in)。 
开关端子必须用热收缩管绝缘。 不要使用模压端子。
拧紧至扭矩为 3.4 ± 1.2 N·m (30.1 ± 10.6 lb in)
6V-8188 螺母  蓄电池端子螺母最多可使用三条电缆或导线端子。 两个电缆接线端可以等于或高于 0 AWG。
拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 
小齿轮和壳体间的间隙为 9.1 mm (0.36 inch)。 
6V-8188 螺母  拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 
马达机架终端  拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 
20 V 和 25 °C (77 °F) 时的吸合电流为 49.3 ± 3.3 安培。 
20 V 和 25 °C (77 °F) 时的保持电流为最大 6.8 安培。
当从小齿轮端观看电起动马达时,马达顺时针旋转。 
25 °C (77 °F) 时的空载性能: 
转速为 6950 ± 1650 rpm。
电流消耗 115 ± 25 安培。
电压为 23 VDC。

Caterpillar Information System:

3500 Engines Engine Oil Pan - Install
C13, C15, and C18 Tier 4 Final Engines Water Pump
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053} Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
2010/11/01 New Tube Assembly Is Used for Low-Pressure Return Lines on C175 Generator Set Engines {1252, 1254}
CX28 On-Highway Transmission Transfer Gear and Case - Assemble
C7 Engines for Combat and Tactical Vehicles Maintenance Interval Schedule
CX28 On-Highway Transmission Transfer Gear and Case - Disassemble
3500B High Displacement Locomotive Engines Auxiliary Water Pump
3512B Engine and SPF343, SPS343 and SPT343 Pumpers Auxiliary Water Pump
3508C, 3512C and 3516C Locomotive Engines Water Connection Group
3508C, 3512C and 3516C Locomotive Engines Water Connection Group
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control: Parameter Adjustment
320E and 323E Excavators Machine System Specifications Travel Counterbalance Valve
3508C, 3512C and 3516C Locomotive Engines Cylinder Block
G3520E Generator Set Engines Fuel Metering Valve - Test
G3520E Generator Set Engines Generator Output Power - Test
G3520E Generator Set Engines Integrated Temperature Sensing Module - Test
C15 and C18 Petroleum Generator Sets Severe Service Application
C13, C15, and C18 Tier 4 Final Engines Crankshaft
G3520E Generator Set Engines Event Codes
349F and 352F Excavators Machine System Specifications Shuttle Valve (Pilot Lines)
C3.4B Industrial Engine High Pressure Fuel Lines
C3.4B Industrial Engine Electrical System
C7.1 Industrial Engine and Generator Set Intake Manifold Air Pressure Is High
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.