C27 and C32 Generator Set Engines Caterpillar


Vibration Damper and Pulley

Usage:

C27 2A3


Illustration 1g03726863

Table 1
Specification for 301-6972 Damper and Pulley Gp 
Item  Qty  Part  Specification Description 
12  149-5267 Taperlock Stud  Torque to 65 ± 10 N·m (48 ± 7 lb ft)
12  1F-7958 Full Nut  Torque to 150 ± 10 N·m (111 ± 7 lb ft)

Caterpillar Information System:

G3516 TA Engine System Overview
G3520E Generator Set Engines System Overview
XQ Auto Paralleling Maintenance Interval Schedule
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Regulator
G3520E Generator Set Engines Electrical Connectors
C27 and C32 Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000} Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning and Heating System
C15 and C18 Tier 4 Final Engines Electrical System
C4.4 (Mech) Marine Generator Set MCS-3 General Information
C4.4 (Mech) Marine Generator Set MCS-3 Fuel System - Prime - Duplex Fuel Filter if Equipped
C3.4B Engines Diagnostic Trouble Codes
2010/09/14 New O-Rings Are Used with the Plugs for the Fuel Passages in 3500 Engines {1100, 1101, 1252, 1254}
3500 Engines Aftercooler - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install - Right Side and Left Side
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Compressor
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Condenser
C27 and C32 Engines for Caterpillar Built Machines Crankcase Pressure Sensor - Remove and Install
2010/10/18 Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
Servicing Procedure for the Auxiliary Water Pump Seal on Certain C-12 and C12 Marine Engines{1371} Servicing Procedure for the Auxiliary Water Pump Seal on Certain C-12 and C12 Marine Engines{1371}
3500 Engines Air Shutoff - Remove and Install
2010/12/13 An Improved Plate Gasket Is Used Between the Spacer Plate and the Cylinder Block on Certain C27 and C32 Engines {1201, 7555}
3500 Engines Engine Oil Pressure Sensor - Remove and Install
3500 Engines Turbocharger Inlet Pressure Sensor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.