Boom Cylinder
Show/hide table
Illustration 1 | g03650194 |
Typical example |
Show/hide table
Specification for 353-9616 Boom Cylinder Gp, 362-9780 Boom Cylinder Gp, and 470-7141 Boom Cylinder Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 244-4258 Bushing | Bore before assembly is Installation depth is |
2 | 1 | 188-4192 Special Locknut | Before assembly. lubricate the face and threads with 309-6932 Hydraulic Oil all around.
Torque to |
3 | 2 | 155-9093 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
4 | 1 | 172-3918 Seal As | Lubricate the inside diameter and the outside diameter with clean grease. |
5 | 1 | 155-9094 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
A | 1 | 353-9617 Cylinder As | Bore is |
B | 1 | - | Diameter is |
C | 1 | 423-8109 Head | Bore over two lands is |
6 | 1 | 172-2997 Bushing | Bore before assembly is Installation depth is |
7 | 1 | 155-9096 Seal Ring | The slit of the seal ring must turn in the direction of the piston. |
8 | 1 | 155-9100 Bushing | Outside diameter is Thickness is |
9 | 1 | 367-3932 Buffer Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
10 | 1 | 367-3933 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
11 | 1 | 165-9295 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
12 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
Caterpillar Information System:
C9.3 Engines for Caterpillar Built Machines Soot Sensor - Remove and Install
C27 and C32 Industrial Engines and C32 Petroleum Engine Safety Messages
C27 Petroleum Generator Set Engines Engine Shutdown Override Occurrence
C27 Petroleum Generator Set Engines Engine Shutdown Occurrence
349F and 352F Excavators Machine System Control Valve (Straight Travel)
C27 Generator Set Engines Engine Monitoring Parameters
C27 Generator Set Fire Extinguisher Location
C27 Generator Set Engines Diagnostic Trouble Codes
2010/08/17 A New Cylinder Head Seal Is Used for C175-16 Generator Set Engines {1124}
2010/07/21 Changes to the Operation and Maintenance Manual of Certain C18 Commercial Engines {0645, 1250, 1300, 1302}
C27 and C32 Industrial Engines Engine Speed/Timing Sensor - Clean/Inspect
Generator Set Communication Wiring Update{1408, 1901, 7490} Generator Set Communication Wiring Update{1408, 1901, 7490}
C27 Generator Set Engines Shutdown - Test
390D Excavator Machine System Specifications Stick Cylinder Lines
C6.6 Industrial Engine Electrical System
320E and 323E Excavators Cooling System Coolant (ELC) - Change
C18 Marine Generator Set Control Panel - Marine Classification Society Remote Control Panel (MCS Remote Control Panel) (If Equipped)
C27 and C32 Industrial Engines and C32 Petroleum Engine Product Description
C6.6 Industrial Engine Engine Description
Service Brakes for Off-Highway Trucks and Tractors {4006, 4008, 4251, 4254, 4255, 4256, 4273} Service Brakes for Off-Highway Trucks and Tractors {4006, 4008, 4251, 4254, 4255, 4256, 4273}
C6.6 Industrial Engine Sensors and Electrical Components
390F Excavator Machine System Cylinder Guard
G3406 and G3412 Generator Set Engines Piston and Rings - Gallery Cooled Piston
G3406 and G3412 Generator Set Engines Cylinder Head