Engine Shutdown Override Occurrence
Use this procedure in order to troubleshoot the following engine event.
Show/hide table
Engine Events | ||
---|---|---|
J1939 Code and Description | Conditions Which Generate the Code | System Response |
971-31 Engine Derate Switch | The engine shutdown override switch is activated while any engine derate is active.(1) | The code is logged.
The Electronic Control Module (ECM) will suspend any request to shut down the engine from the shutdown switches. |
1237-31 Engine Shutdown Override Switch | Any of the engine shutdown switches are activated while the engine shutdown override switch is active.(1)
Note: Activation of the shutdown override switch will not disable an engine shutdown that is initiated by an engine overspeed condition. |
Show/hide table
(1) | This code can be activated by a request from the control panel over the CAN data link to perform the associated task. |
Engine Shutdown Override Switch
- Activated engine shutdown override switch
- Faulty circuit for the engine shutdown override switch
Note: The procedures have been listed in order of probability. Complete the procedures in order.
Activated Engine Shutdown Override Switch
Talk to the operator and ensure that the shutdown override switch has been activated.
To resume engine shutdown monitoring, deactivate the engine shutdown override switch.
Circuit for the Engine Shutdown Override Switch
Inspect the shutdown override switch for evidence of damage that has been caused by vibration, moisture, or corrosion.
Troubleshoot the circuit for the shutdown switch. Refer to Troubleshooting, "Switch Circuits - Test".
Caterpillar Information System:
C27 Petroleum Generator Set Engines Engine Shutdown Occurrence
349F and 352F Excavators Machine System Control Valve (Straight Travel)
C27 Generator Set Engines Engine Monitoring Parameters
C27 Generator Set Fire Extinguisher Location
C27 Generator Set Engines Diagnostic Trouble Codes
2010/08/17 A New Cylinder Head Seal Is Used for C175-16 Generator Set Engines {1124}
2010/07/21 Changes to the Operation and Maintenance Manual of Certain C18 Commercial Engines {0645, 1250, 1300, 1302}
C27 and C32 Industrial Engines Engine Speed/Timing Sensor - Clean/Inspect
Generator Set Communication Wiring Update{1408, 1901, 7490} Generator Set Communication Wiring Update{1408, 1901, 7490}
349F and 352F Excavators Machine System Travel Counterbalance Valve
C27 and C32 Tier 4 Engines Vibration Damper and Pulley
C27 Petroleum Generator Set Engines Engine Overcrank Occurrence
C27 and C32 Industrial Engines and C32 Petroleum Engine Safety Messages
C9.3 Engines for Caterpillar Built Machines Soot Sensor - Remove and Install
390D Excavator Machine System Specifications Boom Cylinder
C27 Generator Set Engines Shutdown - Test
390D Excavator Machine System Specifications Stick Cylinder Lines
C6.6 Industrial Engine Electrical System
320E and 323E Excavators Cooling System Coolant (ELC) - Change
C18 Marine Generator Set Control Panel - Marine Classification Society Remote Control Panel (MCS Remote Control Panel) (If Equipped)
C27 and C32 Industrial Engines and C32 Petroleum Engine Product Description
C6.6 Industrial Engine Engine Description
Service Brakes for Off-Highway Trucks and Tractors {4006, 4008, 4251, 4254, 4255, 4256, 4273} Service Brakes for Off-Highway Trucks and Tractors {4006, 4008, 4251, 4254, 4255, 4256, 4273}
C6.6 Industrial Engine Sensors and Electrical Components