New Fuel Filter Covers and Oil Filter Covers Are Used on Certain Marine Engines {1261, 1308}
- Generator Set:
- C18 (S/N: GBM1-UP; CYN1-UP; GEN1-UP; MGS1-UP)
- Marine Engine:
- 3406E (S/N: 9WR1-UP)
- C32 (S/N: RNE1-UP; RNX1-UP)
- 3412D (S/N: REA1-UP)
- 3412E (S/N: 9KS1-UP; 9PW1-UP)
- C-12 (S/N: K1M1-UP; 9HP1-UP)
- C12 (S/N: NFL1-UP; C1Z1-UP)
- C15 (S/N: RLA1-UP)
- C18 (S/N: WKB1-UP; PLE1-UP; CKH1-UP; C1J1-UP; GES1-UP; KJT1-UP; JKX1-UP; J2K1-UP; T2P1-UP)
- C30 (S/N: CLX1-UP)
- C32 (S/N: RXB1-UP; RNC1-UP; RND1-UP; RNR1-UP; SLT1-UP; T3T1-UP; RNY1-UP; RNZ1-UP)
The new filter covers have an improved design that helps to eliminate weld stress on the clamp. The new 362-6525 Filter Cover is a direct replacement for the existing 225-8575 Filter Cover. Also, the new 362-6526 Filter Cover is a direct replacement for the existing 225-8576 Filter Cover .
These new covers are adaptable back to first production on the serial numbers that are listed above.
This change is effective for the serial numbers listed in Table 1.
Show/hide table
Effective Serial Numbers     |
S/N:NFL201-UP     |
S/N:K1M160-UP     |
S/N:JKX394-UP     |
S/N:T2P992-UP     |
S/N:GBM288-UP     |
S/N:GES249-UP     |
S/N:RNX315-UP     |
S/N:RNY911-UP     |
S/N:RNZ478-UP     |
Caterpillar Information System:
3500B Engines for Caterpillar Built Power Modules Cover Group (Front Housing)
3500 Engines Engine Oil Cooler
3500 Engines Water Lines
C175-16 Marine Propulsion Engines Turbocharger Oil Lines
3500 Engines Water Lines - Aftercooler
3500 Engines Air Shutoff
C4.4 Industrial Engine Engine - Clean
3500 Engines Air Lines
3500 Engines Air Lines
XQ125 Generator Set Trailer - Inspect
Procedure for Correctly Lifting Certain C32 Generator Set Enclosures{7002} Procedure for Correctly Lifting Certain C32 Generator Set Enclosures{7002}
PM3516 Power Modules Parking
C6.6 Industrial Engine Plate Locations and Film Locations
3306B Generator Set Maintenance Interval Schedule - Prime Power
3306B Generator Set Maintenance Interval Schedule - Standby Power
C27 Generator Set Engines Electronic Control System Components
C175-16 Locomotive Engine Fuel Priming Pump
C4.4 Industrial Engine Engine Oil Pressure - Test
C4.4 Industrial Engine Engine Oil Pump - Inspect
C4.4 Industrial Engine Engine Oil Pressure
Crimputer III Setup and Operation{0684, 5057} Crimputer III Setup and Operation{0684, 5057}
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057} Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
2010/11/05 A New Air Motor Lubricator Gp Is Used and A New Fitting Is Available for Service on Certain Engines {1451, 1451}