Engine Oil Pressure
The minimum oil pressure at a maximum engine speed of 2200 rpm and at normal operating temperature is the following value. ... 280 kPa (40 psi)
Caterpillar Information System:
C4.4 Industrial Engine Engine Oil Pump - Inspect
C4.4 Industrial Engine Engine Oil Pressure - Test
C175-16 Locomotive Engine Fuel Priming Pump
C27 Generator Set Engines Electronic Control System Components
3306B Generator Set Maintenance Interval Schedule - Standby Power
3306B Generator Set Maintenance Interval Schedule - Prime Power
C6.6 Industrial Engine Plate Locations and Film Locations
2010/10/01 New Fuel Filter Covers and Oil Filter Covers Are Used on Certain Marine Engines {1261, 1308}
3500B Engines for Caterpillar Built Power Modules Cover Group (Front Housing)
3500 Engines Engine Oil Cooler
3500 Engines Water Lines
C175-16 Marine Propulsion Engines Turbocharger Oil Lines
Crimputer III Setup and Operation{0684, 5057} Crimputer III Setup and Operation{0684, 5057}
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057} Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
2010/11/05 A New Air Motor Lubricator Gp Is Used and A New Fitting Is Available for Service on Certain Engines {1451, 1451}
3612 and 3616 Engines Air Shutoff
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274} A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
323F SA and 323F LN Excavator Access Door and Cover Locations
320E and 323E Excavators Engine Starting with Auxiliary Start Receptacle - If Equipped
C27 Petroleum Generator Set Engines Fuel Pressure Is High
C27 Generator Set Engines Data Link Configuration Status - Test
C27 Petroleum Generator Set Engines Speed/Timing - Test
Installing the 361-3924 Combustion Head Kit on Certain International Chassis That Are Equipped with C13 On-Highway Engines {108B, 108M} Installing the 361-3924 Combustion Head Kit on Certain International Chassis That Are Equipped with C13 On-Highway Engines {108B, 108M}