Air Shutoff
Show/hide table
图 1 | g02173827 |
(2) 空气切断组件 |
Show/hide table
图 2 | g02173901 |
A-A 视图 (2) 空气切断组件 (3) 六角驱动 |
(1) 用 5P-3975 橡胶润滑剂 稍微润滑 O 形密封圈的孔
最小供给压力 ... 1100 kPa159 (psi)
最大供给压力 ... 1720 kPa249 (psi)
Caterpillar Information System:
2010/11/05 A New Air Motor Lubricator Gp Is Used and A New Fitting Is Available for Service on Certain Engines {1451, 1451}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057} Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
Crimputer III Setup and Operation{0684, 5057} Crimputer III Setup and Operation{0684, 5057}
C4.4 Industrial Engine Engine Oil Pressure
C4.4 Industrial Engine Engine Oil Pump - Inspect
C4.4 Industrial Engine Engine Oil Pressure - Test
C175-16 Locomotive Engine Fuel Priming Pump
C27 Generator Set Engines Electronic Control System Components
3306B Generator Set Maintenance Interval Schedule - Standby Power
3306B Generator Set Maintenance Interval Schedule - Prime Power
C6.6 Industrial Engine Plate Locations and Film Locations
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274} A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
323F SA and 323F LN Excavator Access Door and Cover Locations
320E and 323E Excavators Engine Starting with Auxiliary Start Receptacle - If Equipped
C27 Petroleum Generator Set Engines Fuel Pressure Is High
C27 Generator Set Engines Data Link Configuration Status - Test
C27 Petroleum Generator Set Engines Speed/Timing - Test
Installing the 361-3924 Combustion Head Kit on Certain International Chassis That Are Equipped with C13 On-Highway Engines {108B, 108M} Installing the 361-3924 Combustion Head Kit on Certain International Chassis That Are Equipped with C13 On-Highway Engines {108B, 108M}
C27 Generator Set Engines Speed Control - Test
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606} Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
C18 Marine Generator Set Sensors and Electrical Components - Engines Equipped with MCS Control Unit
320E and 323E Excavators Cooling System Coolant Sample (Level 1) - Obtain
Removal and Installation of High-Pressure Fuel Lines of Tier4 Interim Engines{1252, 1254, 1274} Removal and Installation of High-Pressure Fuel Lines of Tier4 Interim Engines{1252, 1254, 1274}