Belts - Inspect/Replace
在你的发动机上配备了蛇形皮带来驱动交流发电机。
发动机配备的皮带张紧器能够将皮带张力自动调整到正确值。
检验
检查交流发电机皮带有无磨损或裂纹。 如果皮带状况不佳,要更换皮带。
因为皮带打滑造成的磨损表示可能需要更换皮带张紧器。
Show/hide table
图 1 | g02168793 |
(1) 交流发电机 (2) 皮带 (3) 皮带张紧器 |
更换
- 拆下传动皮带护罩。
- 转动皮带张紧器 (3) 以释放来自皮带 (2) 的张力。
- 更换皮带 (2) 。
- 重新定位张紧器 (3) 。
- 重新安装传动皮带护罩。
注: 如果安装新皮带,应在发动机以额定转速运行 30 分钟后再次检查传动皮带张力。
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Aftercooler - Test - If Equipped
C27 Petroleum Generator Set Engines Intake Manifold Air Temperature Is High
C7.1 Industrial Engine and Generator Set ARD Failed to Ignite
C175-16 Marine Propulsion Engines Alternator Mounting
C15 and C18 Tier 4 Final Engines Engine Oil Pressure - Test
C27 Petroleum Generator Set Engines Fuel Pressure Is Low
C27 Petroleum Generator Set Engines Exhaust Has Black Smoke
C27 and C32 Tier 4 Engines Diagnostic Capabilities
Procedure for Installing the 296-0014 Prelubrication Oil Pump Gp on C175 Generator Sets{1307, 1319} Procedure for Installing the 296-0014 Prelubrication Oil Pump Gp on C175 Generator Sets{1307, 1319}
C18 Generator Set Engine Oil and Filter - Change
C27 Generator Set Engines Acceleration Is Poor or Throttle Response Is Poor
C27 Petroleum Generator Set Engines Coolant Level - Test
C27 Petroleum Generator Set Engines Pressure Sensor - Calibrate
C27 Petroleum Generator Set Engines Oil Temperature Is High
C175 Generator Sets Belt Tensioner - Check
C13, C15, and C18 Tier 4 Interim Engines Exhaust Balance Valve - Test
2010/06/17 Concerns for Engines with Seawater Cooling in Oil Polluted Water {1000, 1394}
C27 and C32 Tier 4 Engines Engine Oil Pan
C27 Generator Set Engines Component Location
CX31 On-Highway Transmission Power Train Retarder Hydraulic Control Valve - Remove and Install
C27 and C32 Generator Set Engines Fuel Lines - Remove and Install
PM3516 Power Modules Parking
Procedure for Correctly Lifting Certain C32 Generator Set Enclosures{7002} Procedure for Correctly Lifting Certain C32 Generator Set Enclosures{7002}
XQ125 Generator Set Trailer - Inspect